User's Manual

SYSTEM DESCRIPTION AND INSTALLATION MANUAL
T
3
CAS/Part No.9005000
Table 1-7: Directional Antenna Configurations
Antenna
Part Number
Description
7514060-901
Directional antenna with no adapter plate and 1.560-in. (39.624-mm) connector
extension length. Installer must supply adapter plate to mate with aircraft fuselage.
7514060-902
Directional antenna with no adapter plate and 0.705-in. (17.907-mm) connector
extension length. Installer must supply adapter plate to mate with aircraft fuselage.
7514081-901
Directional antenna with flat base, four hole mounting pattern, and 1.560-in.
(39.624-mm) connector extension length.
7514081-902
Directional antenna with flat base, eight hole mounting pattern, and 1.560-in.
(39.624-mm) connector extension length.
7514081-903
Directional antenna with a curved 61.52-in. (1,562.608-mm) radius base, eight hole
mounting pattern, and 1.560-inch connector extension length.
7514081-904
Directional antenna with a curved 66.52- in. (1,689.608-mm) radius base, eight
hole mounting pattern, and 1.560- in. (39.624-mm) connector extension length.
7514081-905
Directional antenna with a curved 74.02-in. (1880.108-mm) radius base, eight hole
mounting pattern, and 1.560-in. (39.624-mm) connector extension length.
7514081-906
Directional antenna with a curved 77.78-in. (1975.612-mm) radius base, eight hole
mounting pattern, and 1.560-in. (39.624-mm) connector extension length.
7514081-907
Directional antenna with a curved 99.02-in. (2,515.108-mm) radius base, eight hole
mounting pattern, and 1.560-in. (39.624-mm) connector extension length.
7514081-908
Directional antenna with a curved 111.02-in. (2,819.908-mm) radius base, four hole
mounting pattern, and 1.560-in. (39.624-mm) connector extension length.
7514081-909
Directional antenna with a curved 118.52-in. (3,010.408-mm) radius base, eight
hole mounting pattern, and 1.560-in. (39.624-mm) connector extension length.
7514081-910
Directional antenna with a flat base, eight hole mounting pattern, and 0.705-in.
(17.907-mm) connector extension length.
7514081-911
Directional antenna with a curved 77.78-in. (1,975.612-mm) radius base, eight hole
mounting pattern, special 0.015-in. (0.381-mm) Teflon gasket, and 1.560-in.
(39.624-mm) connector extension length.
7514081-912
Directional antenna with a curved 111.02-in. (2,819.908-mm) radius base, eight
hole mounting pattern, special 0.015-in. (0.381-mm) Teflon gasket, and 1.56-in.
(39.624-mm) connector extension length.
7514081-913
Directional antenna with a flat base, four hole mounting pattern, and 0.705-in.
(17.907-mm) connector extension length.
7514081-914
Directional antenna with a curved 53.02-in. (1,346.708-mm) radius base, eight hole
mounting pattern, and 0.705-in. (17.907-mm) connector extension length.
7514081-915
Directional antenna with a curved 44.80-in. (1,137.92-mm) radius base, eight hole
mounting pattern, and 0.705-in. (17.907-mm) connector extension length.
7514081-916
Directional antenna with a curved 42.00-in. (1,066.8-mm) radius base, eight hole
mounting pattern, and 0.705-in. (17.907-mm) connector extension length.
Pub. No. 8600200-001, Revision 004
34-45-29
1-15
04 Nov 2014
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.