User's Manual

SYSTEM DESCRIPTION AND INSTALLATION MANUAL
T
3
CAS/Part No.9005000
Table 1-14: T
3
CAS Configurable Functions
Function
State Definition
TCAS
TCAS is always enabled. Hybrid surveillance (applicable to -11801 and -55801) requires pin RMP-5E be
enabled.
TAWS
The TAWS function can be activated or deactivated via program pin RTP-11H. Refer to SDIM Section 4.
Obstacles
The Obstacle function can be activated via program pin RTP-11F. It also requires that TAWS is enabled
and a valid Obstacle Database to be loaded on the T
3
CAS LRU. Refer to SDIM Section 4.
Eleview
The Eleview function can be activated via program pin RTP-11C. It also requires that TAWS is enabled.
Refer to SDIM Section 4.
RWS
The RWS function can be activated via a Factory Modifiable Option (FMO). The FMO file is a component
of the ASDB or embedded AAA and is customized by the supplier. It also requires that TAWS is enabled.
Applicable to -11801 and -55801.
Embedded
Transponder
The embedded transponder function can be activated or deactivated via program pin RTP-11H. Refer to
SDIM Section 4.
ADS-B IN
The ADS-B IN function can be activated or deactivated via the program pin RMP-5E ADS-B/DTIF Enable.
Refer to SDIM Section 4, sub-section 2 T
3
CAS Interface Description. ADS-B IN provides EVaq; additional
ADS-B IN functions are activated separately.
ADS-B IN
Applications
In Trail Procedures application may be activated or deactivated via the program pin RBP-2A ITP Enable for
9005000-10000, -10101, -10202, -10204, and -11203. Refer to SDIM Section 4, Table 4-42 In-Trail
Procedures Enable/Disable Configuration. The ADS-B IN function must be activated prior to the activation
of any specific ADS-B IN applications.
Pub. No. 8600200-001, Revision 004
34-45-29
1-39
04 Nov 2014
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.