User's Manual
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
TCAS 3000 Traffic Alert and Collision Avoidance System
34−43−23
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
Page 1−1
15 Dec 2005
SYSTEM DESCRIPTION
1. General
The purpose of the TCAS 3000 Traffic Alert and Collision Avoidance System is to determine
the range, altitude, and bearing of other aircraft equipped with Mode S/Air Traffic Control
Radar Beacon System (ATCRBS) transponders, with respect to the location of own aircraft. It
also monitors the trajectory of these aircraft for the purpose of determining if any of them
constitute a potential collision hazard. The TCAS is responsible for estimating the projected
intruder track and determining if a potential conflict exists. If so, the system displays an
advisory to the pilot. The system also provides guidance for the optimum vertical avoidance
maneuver. Complementary avoidance maneuvers between two TCAS equipped aircraft are
ensured by coordination of mutual intentions with the other aircraft through the Mode S
transponders.
2. System Components
Table 1−1 gives the components that are supplied by ACSS. Table 1−2 gives the components
that are necessary, but are not supplied by ACSS.
Table 1−3 thru Table 1−5 provide additional component descriptions as follows:
• Table 1−3. Directional Antenna Configurations
• Table 1−4. Control Panel Configurations
• Table 1−5. VSI/TRA Display Configurations.