ACT supplies Access Control and Door Entry products to the market. This catalogue has been put together to provide a comprehensive overview of all products available from ACT, both own brand and third party. It also includes helpful installation tips and schematics to highlight how the products work together. The Access Control products are sold under the brands standalone, smart and pro. The standalone products are suited to doors where the only requirements are entry and exit.
Product Name Description Page Index Standalone Digital Keypads ACT 10 pin only digital keypad, 10 user codes, 2 user groups, indoor / outdoor (IP54) 1 ACT 5 surface / flush mount, pin only digital keypad, 10 user codes, indoor / outdoor (IP67) 1 Digital Keypads & Proximity (125 kHz) surface / flush mount, pin & proximity digital keypad, 50 user codes & 50 cards / fobs, indoor / outdoor (IP67) 2 ACT 10 Flush Kit stainless steel flush mount kits for the ACT 10 3 ACT 10 Weather Shield stainless
Product Name Description Page Reader / Controller (125 kHz) ACT RFID proximity reader / controller, master slave / networkable, 1,000 users, surface / flush, indoor / outdoor (IP67) 9 ACTsmart2 1080 (Pin & Proximity) ACT RFID pin & proximity reader / controller, master slave/ networkable, 1,000 users, surface / flush, indoor / outdoor (IP67) 9 ACTsmart2 1090 pin only reader / controller, master slave / networkable, 1,000 users, surface / flush, indoor / outdoor (IP67) 10 Reader / Controller Acces
Product Name Description Page Index Proximity Readers, Accessories and Cards and Fobs (125 kHz) ACTpro-X 1030 (Proximity only) multi-format slimline proximity mullion reader, pigtail connection, mullion mount, indoor/outdoor (IP67) 23 ACTpro-X 1030PM (proximity only) multi-format proximity reader, panel mount, indoor/outdoor (IP67) 23 ACTpro-X 1040 (proximity only) multi-format proximity reader, surface / flush, indoor/outdoor (IP67) 24 ACTpro-X 1050 (pin & proximity) pin and multi-format prox
Product Name Description Page Cards and Fobs Accessories Lanyard, Clips, Cardholder, Yo Yo Accessories for holding or securing your card / fob 36 personalised and non-personalised printing and the addition of non standard code to a card 36 ACTpro 3000 2 door controller expandable to 16 doors using ACTpro door stations, built-in TCP/IP to facilitate connection via Ethernet, networkable up to 2,000 doors, 30,000 card holders and 1,000 user groups, programming is facilitated by an on-board keypad or a
Product Name Description Page Index Audio Video over IP Door Entry ACTentry V-IP Kit audio video over IP door entry kit including door entry panel, control unit, handset, PSU, software and manual.
Standalone Digital Keypads ACT 10 Digital Keypad Features ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ pin only digital keypad 10 user codes 2 user groups push to exit input incorrect code lockout door monitoring / contact input tamper output fire alarm override interlock toggle mode 12 - 24 Volt AC / DC supply 2 x 5 amp, 30 Volt DC relays 2 x 100 mA Darlington Driver outputs zinc diecast housing, stainless steel keys keypad backlighting indoor / outdoor (IP54) Product Code ACT 10 Related Products (
Digital Keypad + Proximity (125 kHz) ACT 5prox Pin & Proximity Features ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ in & proximity digital keypad p 50 user codes & 50 cards / fobs push to exit input incorrect code lockout toggle mode 5 amp, 30 Volt DC relay polycarbonate housing with stainless steel keys keypad backlighting potted electronics indoor / outdoor (IP67) surface / flush mount options mounts on to standard single gang electrical back box Product Code ACT 5prox (includes digital keypad, flush mo
Keypad Accessories ACT 10 Flush Kit Features ■■ S tainless steel flush mount kit for the ACT 10 digital keypad Product Code ACT 10FK ACT 10 Weather Shield Features ■■ S tainless steel weather shield cover plate for the ACT 10 digital keypad Product Code ACT 10WS Flush Mount Plate Surface Mount Collar Features Features ■■ flush mount plate for the ACT 5 / 5prox ■■ fits standard single gang electrical back box ■■ surface mount collar for the ACT 5 / 5prox ■■ fits standard single gang electrical b
Proximity Cards & Fobs (125 kHz) ACTProx Fob Features ■■ ■■ ■■ ■■ ACT proximity key fob max range of up to 8cm extremely robust supplied in pack of 10 Product Code ACTProx Fob-B ACTProx ISO Card Features ■■ ■■ ■■ ■■ ACT ISO proximity card suitable for printing max range of up to 8cm supplied in pack of 10 Product Code ACTProx ISO-B ACTProx HS Card Features ■■ ■■ ■■ ■■ ■■ CT half shell proximity card A not suitable for printing max range of up to 8cm extremely durable supplied in pack of 10 Produ
Cards & Fobs Accessories Lanyard Clips Features Features ■■ use with ACT cardholder to secure card around the neck ■■ quick safety release clip ■■ use with the ACT cardholder to secure card to clothing Product Code ACT Clip Product Code ACT Lanyard Cardholder Yo Yo Features Features ■■ plastic holder for cards ■■ attach to lanyard or clip ■■ E lasticated holder for cards and fobs Product Code Product Code ACT Cardholder ACT YO-YO Card Printing Bureau Services Card Logo Encoding Featu
Product Specification ACT 10 (Pin only) ACT 5 (Pin only) ACT 5prox (Pin & Prox) Operating Voltage 12 - 24 Volts AC / DC 12 - 24 Volts AC / DC 12 - 24 Volts AC / DC Current Consumption 40 / 120 mA 30 / 120 mA 60 / 100 mA Output Current Sink 100 mA n/a n/a Operating Temperature - 10 to + 50 º C - 10 to + 50 º C - 10 to + 50 º C Door Open Time 0 - 255 seconds 0 - 255 seconds 0 - 255 seconds Relay Contact Rating 2 x 5A / 30 Volt 5A / 30 Volt 5A / 30 Volt Weight 633 gms 150 gms 166
Product Schematics cont’d ACT 5 / 5prox Installation Notes ACT 5 / ACT 5prox ■■ ■■ ■■ ■■ ■■ he ACT 5 / 5prox require operating voltage of 12 - 24 volts AC or DC T 5 amp lock output Indoor / outdoor installation (IP67) Operating Temperature: -10 to +50 C The ACT 5 / 5prox can be surface or flush mounted ACT 10 The ACT10 requires an operating voltage of 12 - 24 volts AC or DC 2 x 5amp relay outputs Indoor / outdoor installation (IP54) Operating Temperature: -10 to +50 C For full functionality use a 12
Product Comparisons Please use these cross refernce charts to help you choose the device which most suits your needs.
Reader / Controller (125 kHz) ACTsmart2 1070 Proximity Features ■■ proximity reader / controller ■■ 1,000 users ■■ standalone / master slave / networkable ■■ programmable inputs/outputs: push to exit, door monitoring / door contact, door alarm (ajar / forced), fire alarm override, interlock ■■ tamper output ■■ 5 amp, 30 Volt DC relay ■■ smartlock option for added security (see p 11) ■■ robust polycarbonate housing ■■ indoor / outdoor (IP67) ■■ surface / flush mount options For a full list of ACT cards ■
Readers / Controller ACTsmart2 1090 PIN Features ■■ pin reader / controller ■■ 1,000 users ■■ standalone / master slave / networkable ■■ programmable inputs/outputs: push to exit, door monitoring / door contact, door alarm (ajar / forced), fire alarm override, interlock ■■ tamper output ■■ 5 amp, 30 Volt DC relay ■■ smartlock option for added security (see p 11) ■■ polycarbonate housing, stainless steel keys ■■ keypad backlighting ■■ indoor/outdoor (IP67) ■■ surface / flush mount options ■■ mounts on
Reader / Controller Accessories ACTsmart2 Lock Features ■■ enhances security of ACTsmart2 installations by locating the relay inside the building (typically in PSU) ■■ relay only operated when a valid card / pin is presented to ACTsmart2 reader ■■ Led status indicator ■■ for more details see p 19 Product Code ACT smart2 Lock Flush Mount Plate Surface Mount Collar Features Features ■■ fl ush mount plate for ACTsmart2 readers ■■ fits standard single gang electrical back box ■■ s urface mount colla
Reader / Controller Cards & Fobs (125 kHz) ACTProx Fob Features ■■ ■■ ■■ ■■ ACT proximity key fob max range of up to 8cm extremely robust supplied in pack of 10 Product Code ACTProx Fob-B ACTProx ISO Card Features ■■ ■■ ■■ ■■ ACT ISO proximity card suitable for printing max range of up to 8cm supplied in pack of 10 Product Code ACTProx ISO-B ACTProx HS Card Features ■■ ■■ ■■ ■■ ■■ CT half shell proximity card A not suitable for printing max range of up to 8cm extremely durable supplied in pack o
Radio Receiver ACT 433RX Long Range Receiver Features ■■ i ntegrates with ACTsmart2 and ACTpro-X readers ■■ integrates with 3rd party systems ■■ range of up to 50 m (site dependant) ■■ 2 channel receiver ■■ supports “Clock & Data” and “37 bit Wiegand” output ■■ 5 - 12 Volt DC ■■ polycarbonate housing ■■ indoor / outdoor ( IP67) ■■ surface / flush mount options ■■ mounts on standard single gang electrical back box Product Code ACT 433RX (includes long range receiver, flush mount plate, surface mount colla
Cards & Fobs Accessories Lanyard Clips Features Features ■■ u se with ACT cardholder to secure card around the neck ■■ quick safety release clip ■■ use with the ACT cardholder to secure card to clothing Product Code ACT Clip Product Code ACT Lanyard Cardholder Yo Yo Features Features ■■ plastic holder for cards ■■ attach to lanyard or clip ■■ E lasticated holder for cards and fobs Product Code Product Code ACT Cardholder ACT YO-YO When Performance Counts Card Printing Bureau Services
Network Controller ACTsmart2 Network Controller Features ■■ required for ACTsmart2 software ■■ can control up to 8 ACTsmart2 devices ■■ 1000 users ■■ 16 User groups ■■ 1000 log events ■■ 12 Volt DC ■■ polycarbonate housing ■■ LED indicators ■■ indoor only Product Code ACTsmart2 Controller (includes network controller, software.
Product Specificatons ACTsmart2 1070 / 1080 / 1090 Reader / Controller Operating Voltage 12 - 24 Volt AC or DC Current Consumption 60 / 100 mA Output Current Sink 100 mA Operating Temperature -25 to +60ºC Door Open Time 0 – 255 seconds Programmable Inputs 1 Programmable Inputs/Outputs 2 Relay Contact Rating 5 amp / 30 Volts Size (H x W x D, mm) 100 x 110 x 35 Weight 173 grams Mounting surface / flush mount options Installation indoor / outdoor (IP67) Construction rugged polycarbo
Product Schematics ACTsmart2 Standalone Reader / Controller ACTsmart2 1080 Master Slave Configuration To Network Type Cable Type* Comments Master ACTsmart keypad/controller ACTsmart keypad/ controller RS485 Screen twisted pair (STP) equivalent to Belden 9501 or shielded Cat 5. Maximum distance 1.4 km * Note: If using UTP (Unshielded Twisted Pair) such as Cat 5 please ensure that the cable is not located near sources of electrical noise.
ACTsmart2 Network Configuration From To PC ACTsmart controller RS232 ACTsmart controller ACTsmart keypad/ controller(s) Network Type RS485 Cable Type* Comments Screen twisted pair (STP) Max distance 20m approx Screen twisted pair (STP) equivalent to Belden 9501 or shielded Cat5. Max distance 1.4 km When Performance Counts * Note: If using UTP (Unshielded Twisted Pair) such as Cat 5 please ensure that the cable is not located near sources of electrical noise.
ACTsmart2 Keypad / Controller with Smartlock The use of the ACT Smartlock with the ACTsmart2 reader / controller will enhance the physical security by placing the lock relay in a more secure location, such as within a PSU that has tamper outputs. The ACTsmart2 keypad / controller is installed on the unsecure side of the entry point and the Smartlock is installed on the secured side.
When Performance Counts ACTsmart2 with ACT 433RX Long Range Reader 20
Installation Notes Readers ACTsmart2 1070 (RFID Prox only) ACTsmart2 1080 (Pin and RFID prox) ACTsmart2 1090 (PIN only) ■■ M ay be installed in exposed outdoor conditions (IP67) ■■ If the electronic outputs and inputs are to be used, or the master slave feature is required, ensure a DC supply to all units ■■ As there are up to 1,000 users available on the ACTsmart2 devices, the system administrator should keep good records to enable efficient addition and deletion of users ■■ When using the master sla
Product Comparisons Please use these cross refernce charts to help you choose the device which most suits your needs.
Proximity Readers (125 kHz) ACTpro-x 1030 Features ■■ m ulti-format slimline proximity mullion reader ■■ ACTProx cards and fobs supported ■■ HID cards and fobs supported ■■ “Clock & Data” or “Wiegand” Output ■■ tri-colour LED indication ■■ built-in bleep tone for audible indications ■■ 2 meter pigtail lead ■■ robust polycarbonate housing ■■ potted electronics ■■ indoor / outdoor (IP67) Product Code ACTpro-X 1030 (includes reader & manual) Related Products ACTpro-X 1030 Vandal Resistant Cover (p 27)
Proximity Readers (contd.
Proximity Cards & Fobs (125 kHz) ACTProx Fob Features ■■ ■■ ■■ ■■ ACT proximity key fob max range of up to 8cm extremely robust supplied in pack of 10 Product Code ACTProx ISO Card Features ■■ ■■ ■■ ■■ ACT ISO proximity card suitable for printing max range of up to 8cm supplied in pack of 10 ACTProx Fob-B Product Code ACTProx ISO-B All ACT and HID cards & fobs are batch HID cards and fobs can be encoded with a coded by default. ACT recommends using unique site code.
Proximity Cards & Fobs (125 kHz) HIDProx Fob Features ■■ HID RFID proximity key box ■■ max range of up to 6 cm ■■ supplied in pack of 10 (batch) Product Code HIDProx Fob-B (batch) HIDProx ISO Card Features ■■ HID RFID ISO proximity card ■■ max range of up to 8 cm ■■ suitable for printing ■■ supplied in pack of 10 (batch) Product Code HIDProx ISO-B (batch) HIDProx HS Card Features ■■ HID RFID Card 11 (half shell proximity card), ■■ max range of up to 8 cm ■■ not suitable for printing ■■ supplied in p
Proximity Reader Accessories Flush Mount Plate Features ■■ fl ush mount plate for ACTpro-X 1040 / 1050 / 1060 ■■ fits standard single gang electrical back box Product Code included with device Surface Mount Collar Features ■■ s urface mount collar for ACTpro-X 1040 / 1050 / 1060 ■■ fits standard single gang electrical back box Product Code included with device ACTpro-X 1030PM Flush Plate Features ■■ flush plate for the ACTpro-X 1030OM ■■ stainless steel / brass ■■ fits standard single gang electrical
PIN Only Reader ACTpro-x 1060 Features ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ in only reader P Potted electronics “Clock & Data” or “Wiegand” output Tri colour LED indications bleep tone for audible indications robust polycarbonate housing indoor / outdoor (IP67) surface / flush mounts on standard single gang electrical back box Product Code ACTpro-X 1060 (includes reader, flush mount plate, surface mount collar & manual) ACTpro 20 Features ■■ p inpad for pin only use ■■ commonly used in conjunction with ACTp
Magnetic Swipe Reader ACTpro 1010 Features t rack 2 magnetic swipe reader “Clock & Data” output Bi colour LED indications 2 meter pigtail lead vandal resistant zinc diecast housing ■■ potted electronics ■■ indoor or outdoor (IP67) ■■ ■■ ■■ ■■ ■■ Product Code ACTpro 1010 (includes reader & manual) Magnetic Swipe Card ACT Card Features ■■ swipe card (magnetic strip) ■■ suitable for printing ■■ ACT logo as standard (blank on request) ■■ supplied in packs of 10 Product Code ACT Card-B (Batch) When
Contactless Smart Card Readers (13.
Contactless Smart Card Readers (contd.) (13.
Contactless Smart Card Cards & Fobs (13.
Radio Receiver ACT433 RX Long Range Receiver Features ■■ integrates with ACTpro-X and ACTsmart2 readers ■■ integrates with 3rd party systems ■■ range of up to 50m (site dependant) ■■ 2 channel receiver ■■ supports “Clock & Data” and “Wiegand” output ■■ 5 - 12 Volt DC ■■ polycarbonate housing ■■ indoor / outdoor ( IP67) ■■ surface / flush mount options ■■ mounts on standard single gang electrical back box Product Code ACT 433RX (includes ACT 433RX receiver, flush mount plate, surface mount collar and pro
Biometric Reader Bio V-Pass FX Features ■■ I dentification or Verification modes ■■ 500 fingerprint templates (identification mode) or 4000 fingerprint templates (verification mode when used with the ACTpro-X 1060 ■■ software assists template management and reader configuration ■■ simple one touch enrolment ■■ user interface gives feedback via multi coloured LED and bleep tone signals Product Code Bio V-Pass FX Bio V-Prox Features ■■ I dentification & Verification (Biometric & integrated Proximity Rea
Handkey F Features ■■ ■■ ■■ ■■ ■■ ■■ ■■ standalone / networked over 500 user templates integrated keypad card reader input fast enrolment & deletion of users tamper switch Integrated wall mount design Product Code ING Palm Reader Handkey Memory Expansion Handkey Memory Expansion Features Features ■■ m emory expansion from 512 (standard) to 9, 728 ■■ m emory expansion from 512(standard) to 32,912 users Product Code Product Code (up to 9,728 users) ING Memory Expansion (9,728) (up to 32,
Cards & Fobs Accessories Lanyard Clips Features Features ■■ use with ACT cardholder to secure card around the neck ■■ quick safety release clip ■■ use with the ACT cardholder to secure card to clothing Product Code ACT Clip Product Code ACT Lanyard Cardholder Yo Yo Features Features ■■ plastic holder for cards ■■ attach to lanyard or clip ■■ E lasticated holder for cards and fobs Product Code Product Code ACT Cardholder ACT YO-YO When Performance Counts Card Printing Bureau Services 3
Door Controllers ACTpro3000 (2 Door Controller) Features ■■ 2 door controller expandable to 16 doors using ACTpro door stations ■■ 30,000 users ■■ 1,024 user groups ■■ networkable to 2000 doors ■■ PC connection using the built in TCP / IP or serial (RS232) port or RS485 (RS485 to serial converter required) ■■ serial port may be used to connect a printer ■■ “Clock & Data” and “Wiegand” format readers ■■ supports ACTpro-X & 3rd party readers ■■ memory card slot allows additional functionality: door pl
Door Controllers (contd.
Door Station ACTpro 100 Single Door Station Features ■■ s ingle door station / expander ■■ max of 14 door stations to each ACTpro 2000/3000 ■■ programmable inputs and outputs: push button, door contact, interlock ■■ auxiliary relay output for alarms: door forced, door ajar, duress, door open, access granted, access denied ■■ LED status notification ■■ requires 12 volt DC supply ■■ indoor only ■■ 5amp, 30 volt DC lock relay and a 1amp, 24 volt DC alarm relay Product Code ACTpro 100 ACTpro101 Single Do
Door Station (contd.) ACTpro200 Two Door Station Features ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ t wo door station / expander controls 2 doors built-in 3 amp monitored PSU battery deep-discharge protection fuse blown LED indication 18 swg mild steel cabinet mains fault indication supports 2 x 7AHr batteries accommodates 2 x ACTpro 100PCB’s mounting points for ACTpro 100PCB on lid supports entry / exit readers 2 x 1.
Software ACTWin Lite ACTWin pro Features Features ■■ A CT Notifier: SMS / e-mail event alerts (from 2.6) ■■ ACTWeb browser based interface for managing users and reporting (from 2.
Software (contd.) ACTWin pro Workstation Features ■■ additional operator work station Product Code ACTWin pro W/S ACTWin pro Multi Tenant Features ■■ allows the system to be partitioned for simpler administration ■■ define up to 200 separate tenants ■■ log events that occur to other tenants are not displayed ■■ in the event of a fire occurring in one tenant the muster report is only generated for users of that tenant ■■ module for ACTWin pro 2.
Network & Communication Devices ACT Lan Features ■■ TCP / IP unit to facilitate connection of ACTpro 1000 / 2000 controllers to Lan ■■ supplied with power pack, serial lead and PC interface leads Product Code ACT Lan ACT Single Channel Interface Features ■■ Single channel RS232 to RS485 network interface ■■ RS232 to RS485 converter ■■ supplied with serial and PC interface cables ■■ requires 12 Volt DC supply Product Code ACT Net IF-1 ACT 4 Channel Interface Features ■■ 4 channel RS232 to RS485 network
Product Specification Door Controllers ACTpro 1000 ACTpro 2000 ACTpro 3000 Operating Voltage 12 Volts DC 12 Volts DC 12 Volts DC Current Consumption 40 / 150 mA 120 / 230 mA 120 / 230 mA Output Current Sink 100 mA 100 mA 100 mA Operating Temperature -10 to + 50 º C -10 to + 50 º C -10 to + 50 º C Controller Weight 750 gms 700 gms 700 gms Controller Size (H x W x D, mm) 138 x 87 x 37 270 x 190 x 60 270 x 190 x 60 Mounting Surface / Flush Surface Surface Installation Indoor
Product Specification (contd.) Door Stations ACTpro 100 ACTpro 101 ACTpro 200 Operating Voltage 12 Volts DC 12 Volts DC 230 V AC +10% -15% Current Consumption 40 / 120 mA 40 / 120 mA 100 mA Output Current Sink 100 mA 100 mA 100 mA Operating Temperature -10 to + 50ºC -10 to + 50ºC -0 to + 50ºC Controller Weight 414 gms 80 gms 4873.
Product Schematics ACTpro 3000 Door Controller with 2 access points on board When Performance Counts ACTpro 3000 Door Controller with 2 access points on board, plus additional access point using the ACTpro 100 Door Station 46
ACTpro-X readers ACT protocol RS485 Network Type * Note: If using UTP (Unshielded Twisted Pair) such as Cat 5 please ensure that the cable is not located near sources of electrical noise. ACTpro Controllers / Door Stations ACTpro Door stations (ACTpro 100 / ACTpro Controller ACTpro 200) To From Cabling Chart 8 core Screen Belden 9501 or shielded Cat5. Screen twisted pair(STP) equivalent to Cable Type* source Max distance 100m if powered from 12V Max distance 1.
When Performance Counts 48 ACTpro Door stations ACTpro Controller ACTpro Controller ACTpro Controller ACTpro Controller ACTpro Controller Master ACTpro Controller (Hub mode) PC* PC* PC* RS232 to RS485 RS232 TCP/IP RS485 ACT protocol RS485 Network Type Screen twisted pair(STP) equivalent to Belden 9501 or shielded Cat5 Screen twisted pair (STP) Cat5 Screen twisted pair(STP) equivalent to Belden 9501 or shielded Cat5.
Max of 16 doors per ACTpro 2000 / 3000. Max of 4 IOM’s. Max of 16 doors per ACTpro 2000 / 3000. Max of 4 IOM’s.
When Performance Counts ACT 433 Long Range Receiver & Transmitters with pro range of Door Controllers, Door Stations and Readers 50
Installation Notes Readers ACTpro-X Readers ■■ M ay be installed in exposed outdoor conditions (IP67) ■■ May be up to 100m when powered from +12V DC ■■ May be a maximum of 30m from the controller when powered from +5V DC ■■ Use 8 core screened cable Note: The +5 Volt reader supply on ACT controllers is normally rated at 100mA. Typically this is sufficient to power 2 ACTpro Readers.
Door Stations ACTpro 200 ■■ For indoor use only ■■ The ACTpro 200 connects to the ACT controller on the DOORS network ■■ The ACTpro 200 is compatible with all versions of ACTpro 2000 and ACTpro 3000 Controllers ■■ U p to 7 ACTpro 200s can be connected to a controller (total of 14 additional access points) ■■ ACTpro 200 and ACTpro 100 may be connected on the same network ACTpro 100 ■■ For indoor use only ■■ The ACTpro 100 connects to the ACT controller on the DOORS network ■■ The ACTpro 100 is compa
Product Comparisons Please use these product feature comparison charts to help you choose the device which most suits your needs.
Product Comparisons cont’d ACTpro-X Reader Description Mounting ACTpro-X 1030 ACTpro-X 1030PM ACTpro-X 1040 ACTpro-X 1050 ACTpro-X 1060 slimline multi-format prox multi-format prox multi-format prox multi-format pin & prox pin only mullion panel IP67 IP67 surface / flush Proximity Pin IP rating IP67 IP67 IP67 ACT Cards and Fobs n/a HID Cards and Fobs n/a Selectable Clock & Data or 37-bit Wiegand Output Robust polycarbonate housing Construction Potted electronics Tri-colour LED Bui
Product Comparisons cont’d ACTpro mifare Reader Description ACTpro mifare 1040 ACTpro mifare 1050 Contactless smartcard reader Contactless smartcard & pin reader surface / flush Mounting Proximity Pin IP rating IP67 IP67 Selectable Clock & Data or 37-bit Wiegand Output Mifare cards Selectable Sector, Serial & Reverse Serial reader Construction Robust polycarbonate housing Potted electronics Tri-colour LED Built-in buzzer Mounts on standard single gang electrical back box 12 Volts DC Operating V
Audio Video over IP Door Entry ACTentry V-IP Kit Audio Video over IP Door Entry Features Each kit comprises of: ■■ ACTentry V-IP door entry panel ■■ ACTentry V-IP control unit ■■ ACTentry V-IP handset ■■ ACTentry V-IP software & manual ■■ ACTentry 1A PSU Kits do not include locks Optional components ACTpro-X 1030PM proximity reader Product Code Surface Mount: ACTentry V-IPVR-SK Flush Mount: ACTentry V-IPVR-FK ACTentry V-IP Door Entry Panel When Performance Counts Features ■■ audio video door entry over
ACTentry V-IP Control Unit Features ■■ ethernet interface unit ■■ converts video and audio signals from door entry panel to TCP/IP data ■■ door and alarm inputs and outputs ■■ echo cancellation control Product Code included in kit ACTentry V-IP Software Features ■■ unlimited users ■■ auto video pop-up or discrete mode ■■ video bandwidth can be set according to network constraints ■■ grant / deny access ■■ volume control ■■ set door open & call answer timers ■■ call routing ■■ events logging Product
ACTentry V-IP PC Handset ACTentry 1Amp Power Supply ■■ handset plugged into PC ■■ indoor use only ■■ 1amp, 12 Volt DC power supply unit Product Code ACTentry V-IP Handset (sold individually or included in kit) Product Code ACTentry 1A Power Supply (sold individually or included in kit) Features Features ACTpro-X 1030PM Reader can be integrated into the Door Entry Panel Features ■■ panel mount multi-format proximity reader ■■ indoor/outdoor (IP67) When Performance Counts Product Code ACTpro-X 1
Audio Door Entry with Access Control ACTentry A10 Kit Audio Door Entry & Access Control Kit Features Each kit comprises a • door entry panel • handset • power supply unit Kit does not include locks Product Code Surface Mount Kit: ACTentryA10VR-SK Flush Mount Kit: ACTentryA10VR-FK ACTentry A10 Door Entry Panel Features Product Code Surface Mount: ACTentryA10VR-S Flush Mount: ACTentryA10VR-F 59 When Performance Counts ■■ audio door entry and access control ■■ connect up to 4 Door Intercom Handsets ■
ACTentry A10 Door Intercom Handset Features ■■ white high impact ABS plastic ■■ internal use only ■■ ‘lock release’ push-button ■■ reduced tone volume when off hook ■■ adjustable volume control Product Code ACTentry A10 Intercom Handset ACTentry 1 Amp Power Supply Features ■■ 1amp, 12 Volt DC power supply unit When Performance Counts Product Code ACTentry 1A Power Supply 60
Product Specifications ACTentry V-IP Audio / Video over IP Number of PC Users unlimited (subject to network capabilities) Number of Doors 8 (door entry panel and control unit required for each door) Operating Voltage 10 - 15 Volts DC Current Consumption 450 / 500 mA Operating Temperature -10 to +50°C Door Open Time 0 – 255 seconds Relay Contact Rating Door Relay: 5A / 30 V DC Alarm Relay: 1A / 24 V DC Mounting surface or flush Installation outdoor IP Rating IP54 Construction brushed stainless steel pan
Product Schematics ACTentry V-IP audio video over TCP / IP with multiple users When Performance Counts ACTentry A10 audio door entry with up to 4 handsets 62
Installation Notes ACTentry V-IP Audio Video over TCP / IP Door Entry ACTentry V-IP Door Entry Panel ACTentry V-IP Software ■■ M ount on a wall near the entrance point and in a sheltered location ■■ Sink or mount onto the mounting surface at a height which puts the camera lens at eye level ■■ P C should be connected to a TCP/IP network. ■■ Install on any PC where the user is expected to answer calls and allow access to the building ■■ Use the CD provided to install the software.
When Performance Counts 64
Customer Services Adding value to ACT products the ACT Customer Services department provides a variety of support structures for all clients
Customer Services Training Certified training is an important element of the security industry and ACT has developed certified training courses for our products. These courses are tailored to provide the fundamental skills required to design, install, commission and operate access control systems. We can work to develop bespoke training modules tailored for your organization. A full range of training programs cover standalone, master-slave and networked access control solutions.
Customer Services (contd.) Development & Systems Integration ACT offers a one stop totally managed service from Project management, development, testing, installation and training by experienced staff. The customer service department has been involved in developing and project managing many bespoke solutions and integration projects from 3rd party database; most notable Microsoft’s LDAP – Active Directory and large human resources databases.
When Performance Counts 68
Appendix
Glossary of Terms for Access Control Access Action of entry into or exit from a security controlled area. ACTWin pro Client/Server version of ACTWin for use by simultaneous users. Access Authorisation Permission granted to a token enabling the holder to enter a location based on a programmed time schedule. ACTWin lite Single user version of ACTWin. Access Control Report Reports indicating the movement (entry or exit) at each access location on the system and the users who have passed through.
Apas open(ed) An apas is open(ed) when the access point affords free passage Apas violation Unauthorised operation of an access point Area controlled anti-pass back Operating mode which requires the user to be present in a designated security controlled area in order to be able to enter another security controlled area.
Glossary of Terms for Access Control cont’d Fault condition Any condition which leads to the interruption or degradation of the access control system’s functionality. Guard Tour A defined route of a security guard. Ingress To enter (opposite of egress) Logic Anti-Passback See anti-passback Memorised information: Information known to the user Monitored Senses the state of the door, if it is open or closed Mullion reader A reader designed to be mounted on the door frame.
Real time download Information which can be downloaded in real time from the PC to the controller such as the change in a users access rights. Tamper Protection Methods used to protect an access control system or part thereof against deliberate interference Radio-frequency identification device (RFID) These are tokens which use radio frequency (RF) to transmit the ID which is stored in the token. TCP/IP support Data communication protocol most commonly used for computer networks and the internet.
Glossary of Terms for Access Control cont’d Token holder An individual who has been issued and holds an access control token. Token Number Coded number stored in the access control token (card or fob). Transaction An event which corresponds to the release of an access point following recognition of a user identity Two users access condition Procedure which ensures that access is granted provided two users have demonstrated their right of access within a preset period.