User Guide

ACTpro mifare®
mifare Card Readers
Product Overview
Smart Cards are cards with memory on board that
can be read or written to. A contactless smart card
does not need to be in direct contact with a reader.
Instead, it communicates using wireless technology.
mifare is a 13.56MHz contactless technology that
allows one card to be used for many applications.
ACT has developed a range of mifare readers,
compatible with the ACTpro family of access
control units. The ACTpro mifare readers are
configurable to read either a mifare card serial
number or from a sector on the mifare card.
Main Features
Choice of mifare proximity only
or pin and mifare proximity
Reader configurable as a Serial
or Sector Reader
Compatible with ACTpro
mifare ISO cards and Fobs
Sector reader operation configurable for
non-ACT cards and Fobs via programming card
Selectable Clock and Data
or 37-bit Wiegand Output
Built-in Buzzer
4 Colour LED
Surface or flush mount (mounting
directly on to standard electrical box)
Robust Polycarbonate housing
Indoor or outdoor installation (IP67)
Operates between -20ºC and +50ºC
+8V to +16V DC operation
Installation / Specification Guidelines
May be installed in exposed
outdoor conditions (IP67)
May be a maximum of 100m from the
controller when powered from +12V
Use 8 core screened cable
-Belden 9504 or equivalent
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
ACTpro mifare Schematic
ACTpro mifare 1040
ACTpro mifare 1050
1050
100
1040
3000
Door 1
1050
Door 2