Manual

www.acti.com
Hardware Manual
15
Other Connections
This section describes the procedures in preparing the external devices that you can connect to
the camera. The camera supports DC12V power input, Digital Input and Output (DI/DO) and
Audio Input and Output devices using the bundled terminal blocks. The use of these devices,
however, is optional.
NOTE: After connecting external devices, use a waterproof tape to protect the cable connection
or house the cable inside a junction box (purchased separately).
Connecting a Power Adapter (Optional for A4x only)
The camera can be powered by a Power over Ethernet (PoE) switch that is IEEE802.3af
compliant. In case of using a non-PoE switch or your PoE switch has a limited power supply, you
can purchase a power adapter and directly connect the camera to a power outlet.
NOTE: The power adapter is not bundled in the package.
The DC12V connector is already attached to the camera.