Manual

www.acti.com
Hardware Manual
17
Other Adjustments and Accessories
How to Reset the Camera (A4x only)
The camera has a Reset button that can be used to restore the camera to its factory default
settings when the need arises.
The Reset button is used for the following purposes:
 The administrator’s password is forgotten and therefore the camera cannot be accessed
 In case of IP address, mask, or allow/deny filter related issues, resulting with the inability
to modify these settings
 In case of connectivity issues or abnormal video quality
Perform the following to reset the camera to its default settings:
1. Disconnect the camera from its power source (either by PoE or DC power).
2. Press and hold the Reset Button and re-connect the power source to the camera.
3. Continue pressing the Reset Button until the green Ethernet LED lights up.