User`s manual

14
 STEP5: Click the [DO1] Button to set DO status by DO1 to
High (1) or Low(0). The device DO level will remain in this status
until changed by another command or device reboots.
 STEP6: Click the [DO2] Button to set DO status by DO2 to High
(1) or Low(0). The device DO level will remain in this status until
changed by another command or device reboots.
 STEP7: Click the [Quit] to exit the live view and return to “Main
Setup page”.
 STEP7: Click the [PTZ] to Show “PTZ Control Window”.
NOTE: If the streaming is disabled, you cannot see the live images
here.
NOTE: For all network router/switches connected to this Camera/Video
Server, be sure to use Auto Negotiation as the Network Connections
Type. This will enable the whole network to always run at the highest
possible speed. Please also refer to Network Speed & Duplex settings
in Host Setting section on Page 20 of this manual.