User`s manual

1.3.10 Camera Setup (CMOS camera models)

This section tells you how to adjust the camera.

 STEP1: Click the [Camera Setup] on the “Main Setup page”.

The “Camera Setup page” is displayed as below

■Camera setting

Parameters

Description

Video Flipping

Check this box to flip the video up-down

Video Mirror

Check this box to mirror the video left-right

Lens

Compensation

Check this box to use best pre-set settings for bundled

lens

NightTime Gain

Threshold

This value controls the level of light where camera

switches into night mode. Increasing it will make camera

switch to night mode at a darker illumination level.

White Balance

Mode

Select the white balance mode. After you set the

parameter, you need to wait for 5~10seconds to see the

final result.

1. AUTO : Auto white balance (default)

2. INDOOR1: Select the indoor white balance profile