User`s manual

- Iris Priority: The IP camera will adjust the

exposure by Iris priority first.

- Manual: Manually select the Exposure Gain and

Shutter Speed below.

AGC Gain

When exposure mode is auto, IP camera will adjust its

shutter speed according to AGC gain and the Maximum

auto shutter speed. Higher AGC gain = brighter images.

Auto IRIS Level

Select the Iris level.

Sense up Level

Select the sense up level.

Light Sensor

Mode

Select light sensor mode.

- Auto: The IP camera will automatically switch

between day or night mode according to lighting

level

- Day: The IP camera will always stay in day mode.

- Night: The IP camera will always stay in night

mode.

NightTime Gain

Threshold

This value controls the level of light where camera

switches into night mode. Increasing it will make camera

switch to night mode at a darker illumination level.

STEP2: Click the [Apply] button of each section to confirm the

settings or click the [Reset] button to re-enter the parameters.

1.3.12 UPnP

1. Enable UPnP

: Check the box to enable/disable UPnP

2. Friendly Name: Enter the UPnP

friendly name.

3. Apply Button: Apply Button: Click apply to confirm the setting.

4. Reset Button: Click reset to re-enter the paramaters.