User`s manual

49
server, enter the user name, the password, Network address,
port number and Max connection time before timeout ( in seconds).
Click [Apply] to use these settings or click [Reset] to clear changes.
Event Configuration:
Event configurations are the responses to be performed when an
event is triggered. For most types of responses, you can create several
different preset responses, then mix and match in event rules. Some
responses are not supported in all IP devices (e.g.: DO, PTZ). Event Motion
Detection profile is also a triggerable response, but the parameters are
defined through the Video Adjust page, not in Event page.
The configurable responses are classified as Digital I/O ports,
Notification messages, Upload Image / Snapshot, Send URL Commands and
go to PTZ Presets.
Digital I/O ports
Digital I/O ports (selected models only) read and control the
voltage difference in the circuit, and respond to it. They are useful in
connecting to a wide variety of devices. D/I is a trigger, while D/O is a
response. Both are setup here. Both have a low voltage state and a high
voltage state , noted as 0 and 1.