Megapixel IP D/N Vandal Proof PoE Outdoor Fixed Dome ACM-7411 Ver.
0 0 1. 2. 3. PRECAUTIONS Read these instructions All the safety and operating instructions should be read before the product is operated. Heed all warnings All warnings on the product and in the instruction manual should be adhered to. The symbol indicates the following items, please carefully read the description next to each symbol. a. Failure to follow the safety instruction given may directly endanger people, cause damage to the system or to other equipment. b.
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Table of Contents 0 PRECAUTIONS________________________________________________ 0-1 Trademarks ______________________________________________________________ 0-1 Liability ________________________________________________________________ 0-1 FCC/ CE Regulat ion _______________________________________________________ 0-1 1 2 INTRODUCTION ______________________________________________ 1-1 1.1 Package Contents____________________________________________ 1-1 1.
11 INTRODUCTION 1.
1.2 Features and Benefits This IP device is a cutting-edge digital video transmission device. It can compress and transmit real time images with outstanding images quality (SXGA, 1280x1024) at reasonable bandwidth through a standard TCP/IP network. That is because it is Ethernet ready and has the powerful ARM9 SoC with excellent system performance to offer dual streams of MPEG4/MJPEG, and both formats offer megapixel resolution.
detection delivers better sensitivity and responds faster than software motion detection. Bundle Powerful Surveillance Software To extend the capabilities of this IP device, a powerful surveillance program is included in the package and is very free to use. Users can easily utilize the existing PC to be a digital video recorder. Schedule recording and manual recording keep every important image recorded in the local hard disk.
1.3 Safety Instructions Don’t use the power s upply with other voltages This device is likely to be damaged or damage other equipments / personnel, if you use a power supply with different voltage than the one included with this device. All warranty of this product will be voided in the situations above. Don’t open the housing of the product Cleaning Disconnect this video product from the power supply before cleaning.
Safety Check Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition.
1.
1. Ethernet Port The IP device connects to the Ethernet via a standard RJ45 connector. Supporting NWAY, this IP device can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet). 2. Powe r Input If your power input is DC12V. Please follow the description on the connector to connect to power. 3.
4. Reset Button Step 1: Switch off IP device by disconnecting the power cable Step 2: Press and continue to hold the Reset Button (with a sharp tipped object, like a pen.) Step 3: Reconnect the power cable while continuing to hold the reset button. The red Power LED light will flash on for 3 second first, turn off for about 15 seconds, flash on for another second and turn off again. By this time the reset to default operation is already completed. This will take around 20 seconds from powe r up.
22 Installation Procedure There are three types of installation of this IP outdoor rugged dome series. Surface mount Flush mount Wall mount ● ● Pictures Optional Bracket required The mounting procedure can be divided into two parts, 1st: Connect the IP outdoor rugged dome series 2nd: Mount the IP outdoor rugged dome series 2.1 Connect the IP Outdoor Rugged Dome 2.1.1 Remove the cover Remove the dome cover with special hex wrench in the accessory bag.
2.1.2 Insert the cable There are two conduit holes, one is at the dome bottom and the other one is at the side of rugged dome with plug. Remove the plug if your cable will go through the one at the side of rugged dome 2.1.3 Connect cables to connectors Please follow the instruction at Chapter 2: Physical Description, for how to connect to each connector.
2.1.4 LED Description There are three LEDs in the system. They are indicators for power, fan and heater respectively. According to operating temperature, the different LED will be lighted for different situation.
2.
2.
2.
33 Adjust the camera 3.1 Adjust zoom and focus Please adjust the camera direction first. Then move the focus and the zoom lever at the picture 1 to adjust the zoom and the focus. Fix the zoom and focus after adjusting. 3.2 Adjust camera functions Refer to picture 1 for what can be adjusted and how to adjust. Picture 1 1. focus lever 2. Zoom lever 3. Tilt adjustment screw 4. Image adjustment axis 5.
44 Product Specification 4-16
