Manual

www.acti.com
Hardware Manual
24
Step 4: Install the Camera to the Surface
1. Align the camera screw holes and the cable hole (if necessary) to the holes on the surface
and attach the three (3) supplied screws (with rubber) to secure the camera.
CAUTION: When using electric screwdrivers, be careful not to touch the internal
camera components while attaching the screws. Since electric screwdrivers vary in sizes,
speed, and force, they may bruise and damage the internal camera components.
DISCLAIMER: ACTi will not be responsible for camera damage caused by improper
installations or the misuse of equipment for installation.