User`s manual

40
Item Layer 1 Layer 2 Layer 3 Default
EXIT OSD
YES
B-3: Configuration Menu
The detailed functions and parameter settings of your high speed dome can be set
by the OSD (On Screen Display) menu with a control program. The functions in
OSD menu are described in the following sections.
18x MODEL
B-3-1 DEFAULT CAMERA
The “DEFAULT CAMERA” is used to restore the camera settings (e.g.
Backlight/Focus/AE//WBC/Aperture). Once any one of the items is modified, the
setting will become <OFF> automatically. Select <ON> for this item to recall the
mentioned camera parameters.
B-3-2 BACKLIGHT
The Backlight compensation function prevents the center object from being too
dark in surroundings where excessive light is behind the center object.
¾ 18x MODEL
Turn this item <ON>; the center object will be brightened in contrast to the edge
of the picture (where a backlight would most likely be located).
NOTE: On 18x MODEL, the Aperture function is provided in
“SETUP MENU2”, instead of “DEFAULT CAMERA”.
MAIN PAGE 1
DEFAULT CAMERA OFF
BACKLIGHT OFF
FOCUS AUTO
AE MODE AUTO
WBC MODE AUTO
ID DISPLAY ON
SETUP MENU1
SETUP MENU2