User`s manual

50
be set on this page.
♦ ALARM PIN
The dome provides 8 alarm inputs and 2 outputs ( 1 x N.O. and 1 x N.C.).
Select an alarm connector which you want to set its alarm-related parameters
with this item, and then set its alarm-related parameters in Alarm Setting
menu.
♦ ALARM SWITCH
The item is used to enable or disable the selected alarm pin function.
♦ ALARM TYPE
There are two kinds of alarm types: Normal Open and Normal Close, which
are illustrated as below. Select an alarm type that corresponds with the alarm
application.
♦ ALARM ACTION
Select one of these modes that choose a kind of actions that should be
executed when an alarm is triggered. The alarm actions can be set to execute
the preset position, sequence, auto-pan or cruise function.
♦ PRESET
ALARM SETTING
ALARM PIN 1
ALARM SWITCH OFF
ALARM TYPE N.C.
ALARM ACTION
PRESET
PRESET POINT 001
DWELL TIME ALWAY