User`s manual

www.acti.com
Hardware Manual
15
How to Do the Waterproof with Conduit Installation
The following installation procedure makes the camera be water-resistant even for the situations
where the camera can easily be flooded by pouring rain.
The important part to focus on during the installation:
The protection of the cabling has to be done by a proper flex
conduit (corrugated tubing). The size of conduit hole on camera
is 3/4”, hence the size of the flex conduit that matches with the
conduit gland is is 3/4” (trade size), or with actual physical
diameter of 26.441mm.
Please note that the conduit gland is included to the package of the outdoor dome camera
and the size of the flex conduit that matches with this conduit gland is 3/8”.
The conduit gland consists of six parts: Lock Nut, Washer(Gasket), Body, Sealing Insert and
Clamping Nut as shown below. Lock Nut of this conduit gland is not accessory on our outdoor
dome camera.
The following images show the step-by-step procedure of completing the water-proof installation.
1. Disassemble the conduit gland as shown
on the photo.