User manual

TD 92674EN
31 October 2013 / Ver. H
Configuration Manual
Ascom d81 DECT Handset
22
5 Handset Configuration
5.6.1 Activate or Deactivate Call Services when Changing Profile
A call service can be activated or deactivated when changing profile in the handset. This
feature can for exam
ple be used to send feature access codes (for example *21*) to the
system when the handset changing profile.
1 If needed, configure the Call services to be used for the profiles, respectively. See 5.6
C
all Services.
2 Select User Profiles > User Profile X (where X represents 1 - 4).
3
Select Presence and diversio
n > Call services.
4In the When
activated and When deactivated drop lists, select the Call services to be
used when the profile is activated and deactivated.
TIP: A profile can be activated when placing a
handset in a charger, see 5.15 Actions when
Handset Placed in Charger on page 29.
5.7 Call Diversion
User friendly call diversion menus can be configured in the handset using PDM/Device
Manager. These menus can then be selected in the handset by selecting Calls > Call services
> Divert calls.
Tip: In addition to the default call diversion menus, up to define 10 extra system specific
services codes can be defined. See 5.6 Call Services.
1 Select Systems > System X (where X represents A - H).
2
Select PBX Settings > Diversion.
3 Select "Internal", "External", "On No Reply", "
On Busy", and/or "All Calls"; enter the
following:
• Prefix - the system specific prefix code to be used (if required by the PB
X used)
• Suffix - the system specific code required to
activate the diversion (for example
"*21*")
• Cancel - the system specific code required to
deactivate the diversion (for
example "#23#").
The user can now enter the diversion number in the handset.
5.7.1 Call Diversion in Profiles
A handset can be configured to divert calls whe
n
a certain profile is activated.
NOTE: The PBX settings for call diversio
n must also be configured, see 5.7 Call Diversion.
1 Select User Profiles > User Profile X > Pres
ence and diversion.
2 Select which calls to be diverted (that is
all call, internal calls etc.).
3In the Divert
calls to field, enter the phone number where the calls are diverted to
when the profile is activated.
4 Select "User Profile X".
5In the Name field
,
enter an appropriate name of the profile.
Additional settings can be added for a profile, such as soft keys, sound and alert etc. See
5.42.1 User Profiles on page 53.