User manual

TD 92674EN
31 October 2013 / Ver. H
Configuration Manual
Ascom d81 DECT Handset
30
5 Handset Configuration
redirect calls/messages.
• Logout - the handset is logged out when placed in charger. This option is only
visible if the license dependent
Shared Phone feature is enabled.
• Message absence - if a message is sent from
a syste
m, it is notified that the
handset is absent.
• Change profile - the handset changes profile when placed in charger.
In the Ch
ange to profile drop-down list, sele
ct the profile to be used. By default,
only the profile Normal is selectable. If configured, additional profiles are visible,
see 5.42.1 User Profiles on pa
ge 53.
•Sound off
1
- the handset is silenced when placed in charger. 
NOTE: Breakthrough messages with high or ala
rm priority are not muted. To mute
all messages, regardless of priority, also set the Show and indicate incoming
messages parameter.
• Show and indicate incoming messages (while charging)
Determines how incoming messages are displayed and indicated when the
hands
e
t is placed in charger. If this parameter is set to No, the message alert is
muted and only the New message icon is displayed. The messages are stored as
unread messages in the Messaging Inbox.

NOTE: All incoming messages are affect
ed by this setting; that is PTT invitation
received as messa
ge, and all other messages regardless of priority, including
breakthrough messages with high or alarm priority. To silence non-breakthrough
messages with a low or normal priority, set the Sound off parameter instead.
5.15.2 In Charger Action when in Call
The handset can be configured to end a call, or turn
o
n the loudspeaker when it is placed in a
charger during a call. If the handset is removed from the charger during the call, it does not
revert to the previous settings.
1 Select Connections > In Charger
2In the Call behaviour drop-
down list, select one of the following:
• No action - no action is performed when handset is placed in charger
• End - the handset disconnects calls when placed in charger.
NO
TE: Some systems and PBXs require the handset to send a DTMF tone to end a
call, See 5.11.1
Send DTMF Tone when Pressing On-Hook key on pa
ge 26 for
configuration.
• Put on Loudspeaker - the handset activates the loudspeaker mode when placed in
cha
rger.
5.16 Clear Lists when Inserted in Charger
The handset can be configured to clear lists when placed in a charger. The following
message and call lists are then cleared:
•Inbox
•Unsent
•Sent
• Call list
• Missed calls
1.If the parameter "Turn off sound" is set to "No", the device is not muted when placed in charger.