User manual

TD 92674EN
31 October 2013 / Ver. H
Configuration Manual
Ascom d81 DECT Handset
34
5 Handset Configuration
1 Press the "Menu" soft key.
2 Select "Calls".
3 Select "Admin menu".
NOTE: The "Admin menu" is only visible if the Admin m
enu is a
ctivated. To activate
the Admin menu, see 6.1.1 Activating the Admin Menu on pa
ge 61
4 From the Admin menu, select "Location info".
5 Select "DECT Location info". DECT loca
tion information is displayed in the handset as
shown in figure 4.
For additional information about DECT location, see the Planning Guide, DECT Locati
on, TD
93009.
Configuring Handset for LF Location Data
The handset can be configured to show LF locati
on data in the handset disp
lay as shown in
figure 5:
Figure 5. LF Location Information
To configure the handset to provide LF location data, perform the following procedure:
1
Press the "Menu" soft key.
2 Select "Calls".
3 Select "Admin menu".
NOTE: The "Admin menu" is only visible if the Admin menu is a
ctivated. To activate
the Admin menu, see 6.1.1 Activating the Admin Menu on pa
ge 61
4 From the Admin menu, select "Location info".
5 Select "LF Location info". LF info
rmation is displayed in the handset display as shown
in figure 5.
A handset configured to display LF lo
cation data shows the following:
• L1- L4: The four last va
lid location IDs. If the handset is in the range of several LF location
devices, the location ID with highest difference between the measured signal strength
and threshold value is regarded as the current location (L1). This means that only one
current location exists, even if several valid locations have been received.
• t1 - t4: T
h
e elapsed time in seconds since the locations L1 -L4 were received,
respectively. It stops counting when it reach its maximum value of 65535 seconds.
Configuring Handset for All Location Data
If a network of both DECT and LF devices are deployed together, the handset can be
configured to show data from both devices as shown in figure 6:
12:34
Back
LF Location info
L1: 0555, t1: 02118 s
L2: 0666, t2: 02115 s
L3: 0444, t3: 02168 s
L4: 0333, t4: 02103 s