User manual

TD 92674EN
31 October 2013 / Ver. H
Configuration Manual
Ascom d81 DECT Handset
39
5 Handset Configuration
movement/Man-down hardware. In addition, this function requires a functionality license.
see 4.4 Upgrade Handset by License on page 11.
The handset can be configured to send an alarm when the pull-cord is pulled off the
handset.
In a template or Number in PDM/Device Manager, the parameters for activation are found
at:
Alarm > Pull-cord alarm
The alarm can also be activated in the handset, see handset’s User Manual,.
Parameters in the current version are:
• Pull-cord alarm
•ALS
• Mode for automatic call after alarm
See also 5.
26 Common Alarm Settings on
page 36 for additional parameter settings.
Information about the handset’s location can also be sent along with an alarm, see 5.21
Base Station Location on page 32 and 5.22 DECT Location and LF Location on page 33.
5.29 Man-Down Alarm and No-Movement Alarm
NOTE: Man-down and No-movement are not available when upgrading the product license
from d81 Messenger to d81 Protector. That is, only applicable for d81 Protector with
the No-movement and Man-down hardware.
Man-down alarm: If the handset is tilted 45 degrees
1
(default) or more for a preset time
(default 7 seconds), the Man-down alarm is triggered.
No-movement alarm: If no movement is detected during a preset time (default 30 seconds),
the No-movement alarm is triggered.
The parameters for activation are found at:
Alarm > Man-down and No-movement alarm
The alarms can also be activated in the handset, see the handset’s User Manual.
Parameters in the current version are:
• Man-down alarm
Determines if the Man-down alarm
is enabled or disabled.
• Man-down detection time
Determines when the warning phase star
ts after man-down is triggered.
• Man-down warning angle
Determines the angle the handset must be ti
lted to trigger the Man-down alarm.
• No-movement alarm
Determines if the No-movement alarm
is enabled or disabled.
• No-movement detection time
Determines when the warning phase starts after No-movemen
t alarm is triggered.
1.The accuracy is +/- 10 degrees.