User manual

TD 92674EN
31 October 2013 / Ver. H
Configuration Manual
Ascom d81 DECT Handset
41
5 Handset Configuration
1 Select Settings > Custom Sounds > Custom Sound X (where X represents 1 - 10).
2 Set the following parameters:
• Label - The name of the custom sound (required). The name is v
isible when
selecting the custom sound as ring signal later on.
• Melody - The text string represents a non-polyph
onic sound. By default, examples
of melodies text string are set for Custom Sound 1 - 7. See also Appendix A:
Programming Custom Sound on pa
ge 70.
• Beat - The tempo in beats per minute to be used wh
en playing the sound.
• Style - The ratio of note to rest period to be
used when playing the sound.
• Instrument - The instrument to be used when playing the sound.
3 Select which custom sound to be used as ring signal by following the instruc
tions in
5.30.2 Set Ring Signal.
5.31 Messaging Settings
The way incoming messages are indicated and displayed in handset can be configured. The
parameters can be found at:
Connection > In Charger
• Show and indicate incoming messages while
charging
Determines how incoming messages are displayed and indicated when the handse
t is
placed in a charger. If this parameter is set to No, the message alert is muted and only
the New message icon is displayed. The messages is stored as unread messages in the
Messaging Inbox.

NOTE: All incoming messages are a
f
fected by this setting; that is PTT invitation received
as message, and all other messages regardless of priority.
Settings > Sound and Alerts
• Vibrate alert
Determines if the handset vibrates when recei
v
ing incoming calls and messages.
• Message alert
Determines the message sound for incoming me
ssages. A predefined melody (Message
1 - Message 7) or a beep code that represents a certain sound can be selected. For more
information on how to configure sounds with beep codes, see 5.31.1 Configure Message
Alerts with Beep Codes on
pa
ge 43.
• Message alert during call
Determines if a message alert should be played when receiving a m
essage during a call.
• Message volume
Determines the message volume for
incoming messages. By default, the message
volume is the same as the volume of the ring signal. A different message volume can be
set with this parameter. The parameter may also be set to "Silent" to mute the message
volume completely.
• Vibrator for call waiting
Determines whether or not the handset vibrates when another call
is received before the
user has finished servicing an ongoing call. If set to "Yes", the handset vibrates during
the ongoing call.
• Vibrator for message during call
Determines if the handset vibrates when receivi
n
g messages during an ongoing call. The
Vibrate alert parameter must also be enabled if the handset vibrates when receiving a
message during the call.