User manual

TD 92674EN
31 October 2013 / Ver. H
Configuration Manual
Ascom d81 DECT Handset
44
5 Handset Configuration
2In the Message alert drop-down list, select "Beeps according to beep code".
High beeps according to beep code.
The handset play
s the message alerts that are mapped to beep codes but with a higher
pitch.
1 Select Settings > Sound and Alerts.
2In the Message alert drop-down list, select "High beeps according to b
eep code".
Enhanced beeps according to beep code.
The handset plays extended message
alerts that are mapped to the beep codes.
1 Select Settings > Sound and Alert.
2In the Message alert drop-down list, select “En
hanced beeps according to beep code”
Custom sounds according to beep code
The handset can play customized message alerts that are mapped to beep codes. The
message ale
rts must first be customized and then mapped to the beep codes.
Customized sounds may also be mapped to enhanced beep codes, as described in Appendix
A: Programming Custom Sound on page 70.
Tip: It is recommended to use this feature to create a message alert that sounds like an item
of equipment, such as a respirator, that generates an alarm.
Create Customized Sound
1 Select Settings > Custom Sounds > Custom Sound X (where X
represent 1 - 10).
Beep code sent from a system/application The handset plays:
Beep code 0 No message alert is played
Beep codes 1- 6 1 - 5, and 10 beeps
Beep code 7 Siren
Beep code sent from a system/application The handset plays:
Beep code 0 No message alert is played
Beep codes 1 -3 1 - 3 beeps
Beep code 4 3 tones chime
Beep code 5 10 beeps
Beep code 6 Alarm sweep
Beep code 7 Siren
Beep code sent from a system/application The handset plays:
Beep code 0 No message alert is played
Beep codes 1- 7 Corresponding Customized sound