User manual

TD 92674EN
31 October 2013 / Ver. H
Configuration Manual
Ascom d81 DECT Handset
46
5 Handset Configuration
message to show the next message in the queue. In this case, the message received at
14:02. The closed message is indicated as a read message in the Messaging Inbox.
Example 2
This example describes the message handling with the following message settings:
•
TTP= 20 seconds
• TTR= Close manually
Tip: It is recommende
d to use these settings if the user is not to be interrupted during 20
seconds while reading a message, unless a message with higher priority is received. When
the user has read a message, its priority is no longer important, that is when TTP expires.
Figure 8. Priority Queue Messaging with PTT 20
In figure , a mess
age with priority 2 is received and displayed in the handset, TTP for the
message is started.
After 10 seconds, a second message with priority 1 is received and displayed while the
message with priority 2 is put in the queue. TTP for the message with priority 2 is paused,
and TTP for the message with priority 1 is started.
After 20 seconds, TTP expires for the message with priority 1 and the message is placed in
the queue. The message with priority 2 is shown again and its TTP continues.
TTP expires after 10 seconds for the message with priority 2. In this case, all messages have
been shown 20 seconds each, and the oldest shown message with the highest priority is
displayed (in this case, the message with priority 1). The handset does not indicate when it
shows the message again, since it already has been shown and indicated once. The message
with priority 2 is placed in the queue.
Example 3
This example describes the message handling with
the following message settings:
•
TTP= 20 seconds
• TTR= 2 minutes
Tip: It is recommended to use these settings if the user is not to be interrupted during 20
seconds while reading a message, unless a message with higher priority is received. When
the user has read a message, its priority is no longer important, that is when TTP expires. In
Prio 2
TTP started
Prio 2
New messages
Prio 1
TTP started
M
es
sag
e
que
ue
10 sec.
Prio 2
TTP paused
Prio 2
TTP
continues
M
es
sag
e
que
ue
20 sec.
Prio 1
TTP expired
Prio 1
TTP expired
Message que
u
e
10 sec.
Prio 2
TTP expired
Prio 1
New messages