User manual

TD 92674EN
31 October 2013 / Ver. H
Configuration Manual
Ascom d81 DECT Handset
47
5 Handset Configuration
addition, if a message is not shown again within the TTR interval, it is considered as not
important and is removed from the queue.
Figure 9. Message handling without manually closing a message.
In figure 9, a message with priorit
y 2 is received and displayed in the handset, TTP and TTR
for the message is started.
After 10 seconds, a second message with priority 1 is received and displayed while the
message with priority 2 is put in the queue. TTP for the message with priority 2 is paused,
but TTR continues. TTP and TTR for the message with priority 1 is started.
After 20 seconds, TTP expires but TTR continues for the message with priority 1 and the
message is placed in the queue. The message with priority 2 is shown again and its TTP
continues.
TTP expires after 10 seconds but TTR continues for the message with priority 2. In this case,
all messages have been shown 20 seconds each, and the oldest shown message with the
highest priority is displayed (in this case, the message with priority 1). The handset does
not indicate when it shows the message again, since it already has been shown and
indicated once. The message with priority 2 is placed in the queue.
After 80 seconds, the TTR expires for the message with priority 2, and it is removed from
the queue and is indicated as an unread message in the Messaging Inbox. When TTR expires
for the message with priority 1, it is also indicated as an unread message in the Messaging
Inbox.
NOTE: If no messages have been read/closed m
a
nually and TTP expired for each message, a
dialogue window New messages(s): [number of messages]. View now? is displayed.
All messages are indicated as unread messages in the Messaging Inbox.
Example 4
This example describes the message handling with
the following message settings:
•
TTP= No prioritization
• TTR= Close manually
Tip: This setting is recommended if messages regardless of priori
ty are to be read in
chronological order, that is, the newest message is displayed first.
Figure 10. Display messages in order regardless of priority
Prio 2
14:02
TTP expired
TTR continues
Prio 2
TTP expired
TTR expired
80 sec.
Prio 2
TTP expired
TTR expired
Messaging Inbox
Prio 2
TTP started
TTR started
Prio 2
New messages
Prio 1
TTP started
TTR started
10 sec.
Prio 2
TTP paused
TTR continues
Prio 2
TTP and TTR
continues
20 sec.
Prio 1
TTP expired
TTR continues
Prio 1
TTP expired
TTR continues
10 sec.
Prio 2
TTP expired
TTR continues
Prio 1
New messages