User manual

TD 92674EN
31 October 2013 / Ver. H
Configuration Manual
Ascom d81 DECT Handset
48
5 Handset Configuration
In figure 10, a message with priority 1 is received at 13:59. Another message with priority 2
is received at 14:02 and is displayed. The message with priority 1 is put in the message
queue. The user needs to close the current message (priority 2) to show the message
(priority 1) in the queue. When closing the message (priority 2) it is indicated as a read
message in the Messaging Inbox.
5.31.3 Broadcast and Multicast Messaging
This feature is supported by the handset, but no parameter sett
ings are required.
5.32 Message Templates
Handsets can be configured with predefined messages using the message template
function. Provided that both parties are connected via an IP-DECT system, a predefined
message can be used in the following ways:
• The user can decline the call but still acknowledge the rece
ipt of the call by selecting a
predefined message and sending it to the caller
• The user replies to an incoming text message by selecting a predefined m
essage and
sending it to the message sender
• The user can construct a text message from
a predefined message.
For additional information about how the message temp
late function is used, see the User
Guide.
5.32.1 Configure the Handset for Message Templates
To activa
te the message template function in the handset so that a user can
decline a call
with a predefined message, perform the following steps using the PDM/Device Manager:
1 Open the "Edit parameters" dialog
2 Select Settings > Answering
3 Locate the parameter "Reject with a message template" and set the value to "On".
5.32.2 Create Message Template Texts
A handset can be configured with up to five predefined messages. A message cannot
exceed 50 characters. To create a message, performing the following steps in the PDM/
Device Manager:
The user closes
the message
Prio 2
14:02
Prio 1
13:59
New messages
Prio 1
13:59
Prio 2
14:02
Prio 1
13:59
Prio 1
13:59
M
essage queue
Prio 2
14:02
Messaging Inbox