User manual

TD 92674EN
31 October 2013 / Ver. H
Configuration Manual
Ascom d81 DECT Handset
51
5 Handset Configuration
5.37.1 Selection of Headset Type (Corded Headset)
To achieve optimal audio quality with the differen
t headset types, it is recommended to set
the corresponding headset type. The default setting is "microphone on a boom", which
means that the audio is optimized for using a headset with microphone on a boom. The
headset type can be changed as follows:
1 Select Connections > Headset.
2In the He
a
dset type drop-down list, select the corresponding headset type to be
used.
If "User headset profile" is selected, continue with chapter User headset profile.
User headset profile
If the preconfigured headset profiles do not m
a
tch the headset or the audio performance is
inadequate, a headset profile can be configured in the following way:
1 Select Connections > Headset > User headset profile.
2I
n the Name of user headset profile field, enter an appropriate name
. The name is
visible and can be selected from the handset menu.
3In the Headset mi
c adjustment drop-down list, select the microphone gain to be used.
4In the Headset speak
er adjustment drop-down list, select the speaker gain to be
used.
Note: Changing these parameters may result in a very high s
ound level, which can cause
hearing damage. In addition, these parameters may result in lower sound quality such as
noise and echo. If the audio problems occur, it is noticeable for the person listening to the
conversation. Evaluate carefully before applying.
5.37.2 Configuration of Headset Button
The headset answer button can be configured
with a predefined function.
Configure a corded hea
dset button
1 Select Connections > Headset.
2In Head
set t
ype drop-down list, select headset to be used.
3In the Call with headset button dr
op-down list, select one of the following:
• Not activated - the call can only be answered or ended.
• Last called number - dials the last called number.
• Predefined number - a predefined number is cal
l
ed (if selected, continue with step
3)
• Hook off - activates the post-dial function, that is, a dial tone is heard and the
user can en
ter the number to be called.
4 If needed, in the Predefined number field, enter
the number to be dialed when the
headset button is pressed.
Configure a Bluetooth headset button
Note: See the User Manual for the Bluetooth headset for more information on how to
connect it and use its answer button.