User manual

TD 92674EN
31 October 2013 / Ver. H
Configuration Manual
Ascom d81 DECT Handset
55
5 Handset Configuration
1 Select System Profiles > System Profiles Sub Groups > Sound and Alerts group >
Sound and alerts X.
2In the Name
of group field, either accept the default name Group X or enter a
description appropriate to this particular sub group of sounds and alerts.
3 From the pull down menus associated with each parameter, select the required
values for:
Ring volume: Select "
S
ilent" or one of the volume levels between 1 (lowest) and 8
(highest).
Vibrating alert: Select "On" or "Off".
In
ternal call: A ringtone to indicate an
internal call.
External call: A ringtone to indi
cate an external calls.
Callback: A ringtone to
indicate a callback.
PTT Call: A ringtone to
indicate a Push-to-talk call.
Key sound: Sele
ct "Silent" or associate the key press with a "Click" or "Tone".
Message alert: Indicate an incomi
ng message by a melody, beeps or a customized
sound.
Message volume: Fo
r an incoming message, set the alert to the same volume level as
for Ring volume or set a higher or lower volume.
Configure Soft key groups (sub group)
Select System Profiles > System Profiles Sub Groups
> Soft key groups > Soft key group X >
Soft key X.
• Soft key label - Determines the name to be displayed on the soft key
• Function - Determines the function to be connect
ed to the soft key.
• Value - Determines a value (for ex
ample, phone number) to a function. The value is only
needed for some functions.
• Control question - Determines if a Proc
eed? dialog shall appear when pressing a soft key.
Configure Idle display grou
ps (sub group)
By default, the name of a system profile is displayed in the handset. It is only needed
to
configure an idle display group if a system name not to be displayed in the handset.
Select System Profiles > System Profiles Sub Groups > Idle display groups > Idle display
group 1.
• Show name of system profile - Determines if the na
me of the system profile is displayed
in the handset’s idle screen.
• Name of group - Determines the name of the group
Create System Profile using Predefined Sub Groups
To create a system profile, it must be connected to the predefined sub
groups.
Select System
Profiles > System Profile X.
• Soft keys group - Determines if a soft group is used.
• Alarm settings group - Determines if a alarm settings g
roup is used.
• Presence group - Determines if a presence group is use
d.
• Idle display group - Determines if an idle display group is used.