User manual

TD 92674EN
31 October 2013 / Ver. H
Configuration Manual
Ascom d81 DECT Handset
57
5 Handset Configuration
5.43.1 Restricting Access to Shortcuts
For some application areas, it may be a requirement that the
user is prevented from defining
shortcuts to predefined functions via the handset Shortcuts menu. Setting a shortcut to
"Read only" via the PDM/Device Manager enforces this restriction. To access the parameters
associated with shortcuts, perform the following steps:
1 Select Shortcuts.
2 Select the required sh
or
tcut parameter:
Hot keys 0, 2 through 9 and "Hook Off"
Soft Keys "Left", "Middle" and "Right"
Navigation keys "Up", "Down", "Left", "Right" and "OK"
3 Select the "Read Only" attribute for the selected parameter and from the drop-down
menu select:
• False - Retain the default, that is, the sel
e
cted shortcut remains configurable from
the Handset Shortcuts menu
• True - The shortcut is set read only. The end user is able to select the shortcuts
menu and indi
vidual shortcut keys from that menu but is unable to assign a
function to the selected key.
5.44 Shared Phone
NOTE: This is a license dependent feature (see 4.4 Upgrade Handset by License on page 11)
and applicable for IP-DECT systems only.
The feature shared phone allows more than one user to use a handset. When a handset is
configured to be a shared phone, it can be used by any shared phone user in the
system.
Extension and messages are user unique. Messages and call lists are deleted when a user
logs off a handset. Contacts, settings, licenses, and Bluetooth devices are common for all
shared phone users of the same handset.
Set Default Master ID
The parameter Default Master ID determines whi
c
h IP-DECT Master the handset shall logon
to. In a small IP-DECT system where a single IP-DECT Master is used, the parameter shall not
be changed (default ID is "0").
In a large IP-DECT system where several IP-DECT Masters are used, the parameter may be
changed depending on which IP-DECT Master that is used.
NOTE: If the handset shall log onto another IP-DECT Master, t
he user can
override the default
Master ID by entering Master ID followed by the User ID in the following format: 
<*><Master ID><*><User ID>
1 Select Systems > Common > Shared Phone.
2In the Def
a
ult Master ID field, change the master ID if needed.
Enable or Disable Shared Phone
1 Select Systems > Common > Shared Phone.