Manual

www.acti.com
Firmware User’s Manual V7.00.44
26
When a scan point has been set, the corresponding Delete icon appears. To remove the
scan point, click .
How to Manage Scan
To start scanning, click .
To restart scanning from the starting point while scanning is in progress, click .
To stop scanning, click .
When scanning is interrupted by other camera operation, like pan, tilt, zoom, etc., checking
Return to Auto Scan after box enables the camera to resume scan function after the defined
period of time (seconds).
NOTE: If both Tour and Scan Controls are enabled at the same time, Touring Control takes
priority over Scan. Tour must be disabled first to use the Scan function.