Manual

www.acti.com
Firmware User’s Manual V7.00.44
59
Size and shape of the region
The size and shape of the motion detection region can be any shape defined by the users.
Regions may even be overlapping.
To configure a region, click once on a point where you want to set the region and continue to click
to draw the desired region.
For example, to configure Region 2, click “Setup” and “Enabled” of Region 2.
Click a starting point of the motion detection region on the screen. The yellow dot indicates the
starting point of the region. Continue clicking on the screen to mark the desired shape of the
region.
After completing the marked region, the region number and the detection size box appear.
The detection size box indicates the minimum size of the object to be identified as an “object”.
This feature is useful to avoid false alarms. For example, if the detection size is set to be the size
of a human or vehicle, motion detection will not be triggered even when a cat passes the motion
detection area.
It is recommended to keep the detection size as small as possible while not causing false alarms
by moving objects that are not humans or vehicles.
Region Number
Motion Detection Region
Detection Size