Hardware Manual

www.acti.com
Hardware Manual
16
6. Tighten the knurled knob to fix the camera position.
Step 4: Connect the Cable(s)
1. Connect the network cable to the Ethernet port of the camera.
2. If necessary, connect a power adapter to the camera. See Connecting a Power Adapter
(Optional) on page 19. Connect audio input/output or DI/DO devices to the camera. See
How to Connect DI/DO and Audio Devices (Optional) on page 21.
3. In case of using a non-PoE switch or your PoE switch has limited power supply, you can
purchase a power adapter and directly connect the camera to a power outlet. The power
adapter must be connected to the supplied terminal block before use.
To do this, follow the procedures below:
1. Loosen the screws of the 12V and GND pins of the power terminal block.