Manual

www.acti.com
Firmware User’s Manual V7.00.44
31
Serial Setting
The Serial Setting section allows the user to set the serial port configuration of the camera to
synchronize it with the serial port configurations of a Pan-Tilt (PT) device. This section is
displayed only when the camera model supports the serial port feature.
Serial Port Control: Select the serail port control that matches with the serial port configured on
the PT device. This function is equivalent to the DIP switch of the PT device.
Serial Port Baud Rate: Select the serial port baud rate that matches with the baud rate set on
the PT device.
After changing any of the items above, press Apply to save the changes. The Reset button
undoes the changes that had just been made but not applied yet.