Manual

www.acti.com
Firmware User’s Manual V7.00.44
58
The biggest challenge of motion detection configuration is to find the settings that do not produce
false alarms and at the same time do not miss any actual intrusions. The rule of thumb is: the
sensitivity should be as high as possible while not producing false alarms. The default
sensitivity level of the cameras is 70 (on a scale of 0-100) and it is a good setting for most
standard cases.
To configure or modify an existing configuration, click on “Setup” to define and adjust the motion
detection region or its parameters. Microsoft Internet Explorer browser is required to configure
the motion detection regions.
There are up to 10 independently configurable motion detection regions. Each motion detection
region has 5 configuration parameters:
Enabled or disabled
Size and shape of the region
Minimum size of the object to be detected
Location of the region
Trigger threshold
Trigger interval
Enabled or disabled
Each region can be enabled and disabled individually. By default, Region 1
is enabled while the other regions are disabled. Only the enabled region
appears on the video display.
Note that the number of the motion detection region is written within of the
region.
The motion detection area of Region 10 is automatically set as the whole area outside any of the
motion detection regions of 1 to 9.