Manual

www.acti.com
Firmware User’s Manual V7.00.44
69
Image
The section Image allows user to control certain parameters of a video frame.
Parameters
Description
Video Flipping / Video
Mirroring
Check this box to flip the video up-down and left-right to achieve the
180-degree rotation effect.
Brightness
Select the Brightness value (0~100). The higher the value, the
brighter the image.
Contrast
Select the Contrast value (0~100). The higher the value, the
difference between light and dark areas becomes more prominent.
Dark color becomes darker while light color becomes brighter.
Saturation
Select the Saturation value (0~100). Saturation makes colors appear
more vivid.
Digital Noise
Reduction
Select the Digital Noise Reduction option (OFF, 1~4). Digital noise
reduction value reduces noise on the video (especially in low light)
which makes the image look smoother and clearer.
3D Noise Reduction
Enable this feature for smooth and clear image. Disable this feature if
the scene contains extreme details that may be smoothed over with
3DNR.
Edge Enhancement
Select the Edge Enhancement value. The higher the value, the
sharper the image.
WDR
Choose the WDR level from following options: Disabled, low, medium,
high, highest.
NOTE: WDR is disabled and will not appear on screen if Exposure
Mode is set to “Manual”. See Exposure / White Balance on page 70.
Image Stabilization
This feature has no obvious effect under normal viewing conditions.
However, if the camera is installed inside a moving vehicle, such as a
train, etc., enable this feature to make the image stable even when
the environment is in constant motion.
After changing any of the items above, press Apply to save the changes. The Reset button
undoes the changes that had just been made but not Applied yet.
The button “Restore image settings to default” is a quick way of restoring factory default
image settings without needing to reset the whole camera to factory default.