Manual

www.acti.com

Firmware User’s Manual V7.00.44

Privacy Mask Setup

NOTE: Privacy Mask is not available on zoom and PTZ cameras.

It is possible to set up up to 4 regions of privacy masks. The adjustment of the privacy mask

region can be done when region is checked under “Setup“ column.

You may resize and drag the region the

same way as the motion detection

regions: upper bar that contains the

number of the region can be used for

dragging the region across the video

while the white box at the right lower

corner of the privacy mask region can be

used for resizing the region.

There are 4 pre-defined color options for privacy masks. If the user wants to use any other colors,

please use URL commands to set up the privacy mask instead. To do that, please refer to the

Guide that explains the use of URL commands.

When switching back to live view, the privacy mask would look like this:

Please note that Privacy Masks will take effect on all streams 1, 2 and 3.

After changing any of the items above, press Apply to save the changes. The Reset button

undoes the changes that had just been made but not Applied yet.