Manual

www.acti.com
Firmware User’s Manual V7.00.44
93
Device boots successfully: This triggers the event response once the device boots up. You can
use this to create a notification system that keeps record of when the device has been rebooted
via email.
Reboot device: This triggers the event response when the device is shut down via web UI “Save
and Reboot”. Use this to keep record of when the device setting is edited. Note that this will not
take effect when the device is unplugged, as this is not normal shutdown.
Tamper: The event is triggered when the camera is tampered with. For example, the camera is
sprayed with paint, etc.
Camera is attacked (Shock Detection): The event is triggered when the camera is hit by an
object.
What responses will occur?
Available responses vary depending on what triggered the event.
Digital Output (selected models only): This is a useful link to other devices. Click to include this
in the response for this rule.
Send notification Message: Select from the three pre-defined messages which you’ve setup in
the Event Configuration section. You may enable multiple messages at the same time. For
sending Email, please limit the recipient to one per event rule. If you need to send email to more
than one recipient, please use separate event rules triggered by the same trigger.
Upload video/snapshots: Select which of the event configurations to include in this response
set. If you are sending email via upload video and sending notification message at the same time,
the system will automatically merge the two emails into one. The subject and image will be based
upon the Upload snapshot Event configuration enabled, but the message in the body text will be
based upon the Notification messages.
In general, please stick to the “one email per event rule” limit for best performance.