Hardware Manual

www.acti.com
Hardware Manual
12
Mounting Options
The camera can be installed both indoors and outdoors. For outdoor installation, additional
waterproof housing is required. Below are several mounting options that you can use to install the
camera. Select the most suitable solution for your installation environment.
Mount Types
Accessories
Ceiling or Wall
(Indoor)
The camera comes with a mounting block which is used to
mount an additional bracket to complete the installation. The
additional bracket is not included in the camera package. You
may use the bracket from a local supplier or purchase ACTi’s
indoor bracket.
See Indoor Installation Procedures on page 19 for more
information.
PMAX-1104
Wall
(Outdoor)
A waterproof housing is required when installing the camera
outdoors. The following accessories can be used:
PMAX-0200 (AC 110V) PMAX-1101
with heater and fan
PMAX-0201 (AC 220V) PMAX-1101
with heater and fan
PMAX-0202 PMAX-1101
(no heater and no fan)