Installation guide

www.acti.com
Installation Guide
4
Installation Procedures
The camera can be installed onto a pole using additional mounting accessories. The accessories
can be purchased individually or as an accessory set.
Mounting Solution
Required Accessories
Pole Mount with
Mounting Bracket
(SMAX-0092)
PMAX-0503 PMAX-1103
The installation steps vary depending on the preferred waterproof cabling solution. There are 3
ways to do the cabling:
 Installation Using the Pole Mount with Bracket and Sealant Tape, see page 5.
 Installation Using the Pole Mount with Bracket and Flex Conduit (Not applicable
for D3x Series), see page 11.
 Installation Using the Pole Mount with Bracket and Naked Cable (Not applicable
for D3x Series), see page 21.