IMPRESSA E40 IMPRESSA E45 IMPRESSA E60 IMPRESSA E65 Art. Nr.
Jura Impressa E40/E45/E60/E65 English. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . = Note = Important = Tip 5 – 19 Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.juraworld.
2 1 Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig.
Operating elements Jura Impressa E40/E45/E60/E65 9 10 8 11 7 12 6 5 4 3 2 1 13 14 15 16 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Water quantity switch Powder coffee selection switch Coffee key for 2 cups Maintenance key (for functions such as: rinsing, cleaning, de-scaling, filter) Coffee key for 1 cup ON/OFF switch Display with symbols Water tank with carrying handle Height-adjustable coffee spout Pre-ground coffee filler funnel Cover for beam container Selector switch for hot water/steam Pi
Contents Jura Impressa E40/E45/E60/E65 1. Description....................................................page 6 8.2 Return to stand-by .................................. page 11 1.1 Symbols .................................................page 6 9. Drawing off hot water......................................page 11 2. Safety instructions ..........................................page 7 9.1 Drawing off hot water E45 .........................page 12 2.1 Warnings...........................................
Important information for the user 1.1 Symbols Thank you for choosing this Jura product. 1 COFFEE READY Please study these instructions carefully before using your new machine for the first time and keep them in a safe place for easy reference in future. Should you require further information or should particular problems occur that are not dealt with in sufficient detail for you in these operating instructions, please contact your local dealer or us for the information you require.
2. Safety instructions 2.1 Warnings Children are unaware of the dangers that electrical machines can represent; for this reason, children should never be left unsupervised with electrical machines. This machine should only be used by people who have read these instructions. Never use a faulty machine or one with a damaged power cable. Never immerse the machine in water.
Lift up the cover of the bean container (11). Clean out any dirt or foreign objects from the bean container. Pour coffee beans into the bean container and close the cover again. 3.5 Adjusting the grinder You have the possibility of adjusting the grinder to the roast of your coffee. We recommend the following: for a light roast ➞ a finer adjustment for a dark roast ➞ a coarser adjustment Open the cover of the bean container. To adjust the grinding, turn the selector switch (Fig.
Pull the plug and the feed wire out of the wire box on the back of the machine. Put the plug in. Do not switch the machine on. Press the draw-off key for about 3 seconds. Now, the , symbols light up. , , Now select the corresponding level with the draw-off key and press the ON/OFF switch in order to save the setting. The symbols go off. The water hardness only need to be set before the first use of the machine or if a different water quality is used.
5. Rinsing the machine When the symbol lights up, a rinsing process is demanded. Place an empty cup under the coffee-spout. Press the rinsing maintenance key (4). The rinsing process is automatically ended. If the machine has been switched off and has already cooled down, the rinsing function will be demanded when the machine is switched on. A rinsing is automatically started when the machine is switched off. 6.
If the draw-off key is pressed by mistake, the selection can be cancelled by pressing the draw-off key. Your machine rinses. After each cleaning operation the filler funnel for the 2nd coffee type should be cleaned. 8.1 Drawing off steam with the Profi-Auto-Cappuccino/Caffè Latte (optional E45) The Profi-Auto-Cappuccino/Caffè Latte is optionally available. Contact your authorized dealer. 8.2 Return to stand-by 8.
9.1 Drawing off hot water E45 Install the hot water nozzle to optain perfect water flow. This is included in your Welcome Pack. 10. Switching machine off When the machine is switched off, the rinsing programme is automatically started. Therefore, place an empty container under the coffee-spout and press the ON/OFF switch. When the rinsing water has run into the cup, the machine switches off. Throw the rinsing water away. 11. Care and maintenance 11.
11.7 Insert filter Pull up the cartridge holder in the water tank. Pressing gently, put the filter cartridge into the water tank (Fig. 4). Close the cartridge holder until it engages audibly. Fill the water tank with cold fresh tap water and put it back into the machine. Switch the machine off with the ON/OFF switch. Press the draw-off key for about 3 seconds. The degree of hardness set appears on the display. Press the draw-off key until only the symbol is still alight.
11.10 Empty system This procedure is necessary in order to protect the machine from damage by frost in transport. Switch the machine OFF with the ON/OFF switch. Place a vessel under the pivoting nozzle for hot water/steam (13). Turn the selector switch for hot water/steam (12) to position . Switch your machine back on again with the ON/OFF switch. The symbol lights up. Press the maintenance key until the symbol flashes. .
13. Descalcifying The machine has an integrated de-scaling programme. If you use a Claris filter cartridge, your machine does not need de-scaling. Only use Jura cleaning tablets. They are available from your Jura dealer. If the machine needs de-scaling, the symbol flashes. You can continue to draw off coffee and hot water/steam and then run the de-scaling programme later. Only run the de-scaling programme when the machine has been switched off for at least 2 hours and has cooled down well.
14. Disposal For correct disposal, you should return your coffee machine to your dealer, your Jura service centre or the firm of Jura. 15. Tips for perfect coffee Height-adjustable coffee-spout You can adjust the coffee-spout to the size of your cups Grinding See point 3.5 Pre-warming cups You can pre-warm the cups with hot water or steam. The smaller the amount of coffee, the more important the pre-warming. Sugar and cream Heat is lost by stirring the contents.
16. Messages Display Cause Action – System empty – Fill system (see point 4.1) – System too hot after drawing off steam – Reset to coffee stand-by – Wrong position of selector switch – Put selector switch into correct position – General troubles 1. – – – – Switch off disconnect from mains connect to mains switch machine on 2.
Display Cause Action – Drip tray not inserted properly or missing – Insert correctly – Cleaning necessary – Carry out cleaning process – De-scaling necessary – Carry out de-scaling process – Replacing of filter – Run program Problem Cause Action Coffee flow is stopped after pre-brewing – bean container empty – Fill with beans – not enough coffee powder – Correct amount of powder – foreign body in grinder – Drawing off coffee with pre-ground powder – is still possible flash flash flash
Problem Cause Action Not enough froth when frothing milk – frothing aid blocked – clean frothing aid – frothing aid in wrong position – draw off steam (see point 8) If the above mentioned messages and/or problems still exist, please contact your dealer or get in touch directly with Jura Elektroapparate AG. 18. Legal information 19. Technical data These operating instructions contain the information necessary for the correct use, operation and maintenance of the machine.
