Hardware Manual

www.acti.com
Hardware Manual
10
5. Connect the RJ-45 male-type connector of the camera to the 2-sided female type
connector (included in the waterproof cable kit). On the other side of the 2-sided female
type connector, connect the Ethernet cable from the network.
The above cable connection can be used if the camera will be installed indoors or when a
junction box will be used on an outdoor installation.
If the camera will be installed outdoors and without a junction box to protect the cable
connection from rain or dust, use exterior-grade Ethernet cables (CAT5/CAT5e/CAT6) and
be sure to apply the waterproof installation, see Waterproof Cable Installation on page
11.
Ethernet cable
of the camera
Ethernet cable
from the network
2-Sided Female Type
Connector