Hardware manual

www.acti.com
Hardware Manual
10
The reset button can be used for following purposes:
The administrator’s password has been forgotten and therefore the camera cannot be
accessed.
1. In case of IP address, mask, or allow/deny filter related issues, resulting with inability to
modify these settings.
2. In case of connectivity issues or abnormal video quality.
How to do the reset properly?
Using a pointed object, such as a paper clip, press and hold the reset button for 5 seconds.
2) Memory Card Slot
Insert a memory card into this slot for local recording purposes. See How to Use a Memory
Card on page 26 for more information.
NOTE: Supports microSDHC and microSDXC cards.
3) Ethernet Port
Connects to a network using an Ethernet cable.