Hardware manual

www.acti.com

Hardware Manual

CAUTION: When using electric screwdrivers, be careful not to touch the camera

components while attaching the screws. Since electric screwdrivers vary in sizes, speed, and

force, they may bruise and damage the camera components.

DISCLAIMER: ACTi will not be responsible for camera damage caused by improper

installations or the misuse of equipment for installation.

Step 4: Connect the Cable

1. Connect the network cable to the Ethernet port of the camera.

2. Connect the other end of the network cable to a switch or injector. Then, connect the switch

or injector to a network, PC and a power source. See Power-over-Ethernet (PoE) connection

example below.

Network

AC Power

Source

PoE Injector /

PoE Switch

Power Cable

Ethernet Cable

(Data + Power)

Ethernet Cable

(Data)

Camera

Ethernet Port