Technical data

Service
Operating Manual
ID 442281.00
WE KEEP THINGS MOVING
51
12
12.3 Copying Paramodule
The following section describes how to copy a Paramodule so that an application
can be utilized in additional inverters.
Proceed as shown below:
Copying Paramodule
1 Start the action A00 save values. Wait until the action has been concluded
with the result 0:error free.
2 Remove the Paramodule from the inverter.
3 Install the new Paramodule on the inverter!
4 Start the action A00 save values. Wait until the action has been concluded
with the result 0:error free.
Ö You have copied Paramodule.