Hardware Manual

www.acti.com
Hardware Manual
10
Item
Description
6
Reset Button
Restores the factory default settings of the camera. To reset the
camera, while the power is on, press and hold the Reset Button
for at least 5 seconds or until the Red LED lights up.
7
System LEDs
Indicates the camera status:
 Amber LED: Blinks when network activity is in progress.
 Red LED: Lights up when the camera is powered up and
goes off again after the boot up process is complete.
 Green LED: Lights up when the camera is connected to a
network.
8
Memory Card Slot
Insert a memory card (not included) into the slot for local
recording purposes. See How to Install / Remove the Memory
Card on page 21 for more information.
NOTE: Supports microSDHC cards only.