Manualshelf

Hardware Manual

ManualsBrandsACTi ManualsSecurity Cameras2MP Outdoor PoE Network Dome Camera with 3.1mm Fixed Focal Lens
21222324252627282930
www.acti.com
Hardware Manual
24
Other Cable Connections
This section describes the procedures in attaching the Ethernet cable connector, preparing and
connecting an external power adapter, digital input and output (DI/DO) device, such as alarms,
sensors, etc., and audio input and output devices. The use of these devices, however, is optional.
NOTE: If these connectors will not be used, leave the caps on to avoid water or dust from
entering the connectors.
How to Attach the RJ-45 Connector
1. Prepare the following tools:
a. RJ-45 connector
b. Crimping tool
c. Scissors
2. Cut about one (1) inch into the plastic sheath from the end of the cable.
DC 12V
DI/DO Connector
Audio Input/Output
Jacks