Manualshelf

Hardware Manual

ManualsBrandsACTi ManualsSecurity Cameras2MP Outdoor PoE Network Dome Camera with 3.1mm Fixed Focal Lens
21222324252627282930
www.acti.com
Hardware Manual
26
Connecting a Power Adapter (Optional)
The camera can be powered by a Power over Ethernet (PoE) switch that is IEEE802.3af
compliant. In case of using a non-PoE switch or your PoE switch has limited power supply, you
can purchase a power adapter and directly connect the camera to a power outlet. The power
adapter must be connected to the supplied terminal block before use.
To do this, follow the procedures below:
1. Loosen the screws of the 12V and GND pins of the power terminal block.
2. Take note that a standard power adapter cable has two (2) different wires:
3. Connect the wire with the white stripe to the 12V pin and the other to the GND pin.
White stripe: Connects to 12V Pin
Connects to GND Pin