Manualshelf

Hardware Manual

ManualsBrandsACTi ManualsSecurity Cameras2MP Outdoor PoE Network Dome Camera with 3.1mm Fixed Focal Lens
21222324252627282930
www.acti.com
Hardware Manual
27
4. Tighten the screws of the 12V pin and the GND pins to secure the wire connection.
5. Set the prepared power adapter for connection later. Below is an example of a power adapter
with an attached terminal block.
NOTE: The power adapter is not bundled in the package.
6. After mapping the wires to the terminal block, connect the terminal block to the DC12V power
connector of the camera and make sure to wrap the connection using a waterproof tape (can
be purchased in hardware stores).