User Manual

www.acti.com
Firmware User’s Manual V6.09.45
26
How to Set Preset Points
Preset points are user-defined areas that the camera can pan or zoom in to. A series of preset
points can be grouped as one Tour.
To create a preset point, do the following:
1. On Preset, click a icon to start creating a preset point.
2. Under the Name field, type a preset point name.
3. Pan, tilt, and zoom on the area that you want to set as the preset point.
4. Once done, click the icon again to close and complete the preset point.
5. Repeat the above procedures to create more preset points.
To go to the preset point directly, click .
To delete the preset point, click .
How to Set Idle Time and Return Camera to Predefined Position
This feature allows the camera to go directly to a predefined position after an idle period of time.
Idle time refers to the time when the camera has no operation like pan, tilt, zoom or tour activity.
To set the camera to go to a predefined position, do the following:
1. On Return Position, select one of the following options:
a. Home Position: The camera will go to the Home position as defined in How to Set
the Home Position on page 25.
b. Preset point name: The camera will go to the preset point which is already
configured (see How to Set Preset Points on page 26).
c. DISABLE: To disable this functiion.
2. On Idle Time, type the duration of time (seconds) wherein the camera is considered idle.