User Manual

www.acti.com
Firmware User’s Manual V6.09.45
29
When a scan point has been set, the corresponding Delete icon appears. To remove the
scan point, click .
Scan function is supported only in PTZ cameras and box cameras with serial ports. For box
cameras, the scan function works when a PT scanner is connected to the camera via serial port
connection. See Serial Setting on page 32.
How to Manage Scan
To start scanning, click .
To restart scanning from the starting point while scanning is in progress, click .
To stop scanning, click .
When scanning is interrupted by other camera operation, like pan, tilt, zoom, etc., checking
Return to Auto Scan after box enables the camera to resume scan function after the defined
period of time (seconds).