Specifications

Union School District CCTV Spec – 2014 V 2.0
Bid Proposal Due by 2:00pm Friday May 2, 2014 4
F. Recording and Schedule Management
Provide the following minimum recording functions:
1. Schedule Recording: Provide recording of video with user-defined schedule and time period.
2. Event Recording: Record video when the alarm event is triggered.
a. Pre-Event Recording: User-defined time period to record before event occurs. The minimum
buffer is 5 seconds.
b. Post-Event Recording: User-defined time period to record after event occurs. The maximum
buffer is 300 seconds.
3. Time segment: Offer the maximum 24 hours / 7 days
4. Speed Up: Different recording frame rate settings for non-event and triggered event.
5. Manual Recording: Instant recording upon mouse click.
6. Dual Stream Management: Recording of stream 1 or stream 2 of ACTi dual stream devices.
G. Storage Management
1. Interface: Serial ATA
2. HDD Bay: Minimum 8 disks (1 bay is occupied by system HDD)
3. RAID Level: Software RAID 0, 1
4. External Storage Support: iSCSI, eSATA, USB mass storage (USB 2.0)
5. Recording folder name and location is changeable.
6. Configure the system log keep days.
H. Event Management
Provide the following minimum event handling functions:
1. Event Trigger Types: Provide for event handling for event types including Video motion
detection; Passive IR sensor; External device through digital input; Video loss and recovery;
Network loss and recovery; Server loss and recovery; Disk full and Disk out found.
2. Schedule setting: Define the schedule of event manager to activate the defined event handling
service.
I. Device Management
Provide the following minimum device management functions:
1. Support Auto search and Add devices manually.
2. Device properties can be synchronized automatically.
3. Configure Device Settings: Video attributes, Motion settings and PTZ function.
4. Provide device icon to show the device status.
5. Copy device settings to multiple devices.
J. PTZ Control Functions
Provide the following minimum PTZ control functions:
1. PTZ Management: Provide management of pan, tilt, zoom controls; speed control; both buttons
and mouse controls.
2. Preset Points and Tours: Provide preset position controls including goto, set, clear preset
positions and create auto tours between preset points.
3. Number of Preset Positions: Provide control for 32 preset positions.
4. PTZ Tours: Provide for patrol of preset positions with user-defined dwell time.
5. PTZ Pattern: Provide PTZ pattern control with execute of speed dome pattern commands.
6. Mouse PTZ Control: Provide on-screen 8-direction PTZ operation via mouse user interface that
can be ran run in full-screen mode.
7. USB Joystick Control: Provide for PTZ control via a joystick connected to USB port.
8. Default Protocol: Auto-detect camera’s PTZ protocol. Available protocols: ACTi, ACTi-D, ACTi-P,
Dynacolor and Visca.
K. System Configuration
Provide the following minimum functions for system functions:
1. User management: Multiple number of groups and users, liveview/playback/setup/remote level
permission, and adding user accounts from Active Directory.
2. Language: English support
3. Customizable User Interface: Define the layout of user interface for live view and playback.